3-in-1 multi-functional sander PMSS 10-220

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

3-in-1 multi-functional sander PMSS 10-220

For larger areas, fine sanding and reaching edges and corners – one device can accomplish all

Orbital sander, delta sander or random orbital sander – which is the better choice? When faced with a great variety of grinding applications this certainly could be a difficult decision if it weren't for the multi-functional sander PMSS 10-220 from Trotec. With this 3-in-1 multi-functional sander you are optimally equipped with a suitable sanding tool for any situation seeing as its three variably interchangeable sanding plates ensure that the PMSS 10-220 can be used as needed: as orbital sander, delta sander or random orbital sander.

Focussing on the well-rounded talents of its users, the PMSS 10-220 comes with an equally distinct versatility. As a genuine multi-function tool the PMSS 10-220 can be turned into a full-fledged orbital sander, delta sander or random orbital sander in just a few steps by exchanging the three supplied sanding plates.

For each type of application a powerful 220 W motor operates reliably inside this multi-functional sander without any sign of weakening and allowing the stepless preselection of the oscillation rate between 14,000 and 24,000 oscillations per minute. This ensures material-compatible working on any surface.

The PMSS 10-220 – for an optimally prepared ground

Large grinding surface, great versatility: Trotec’s PMSS 10-220

Whether you want to remove old coats of paint from large areas, polish and smoothen surfaces or sand precisely and seamlessly in corners, all of the above grinding operations can be realized without difficulty using the three exchangeable sanding plates of the PMSS 10-220.

The suitable sandpaper for each task can be attached quickly and without the need for tools. For this purpose all sanding plates come equipped with a Velcro® fastening system, the plate of the orbital sander is further provided with a clamping tool. Consequently, you can also use sandpaper without Velcro® backing for this particular sanding application.

Compared to other grinding machines on the market, the sanding plates of the PMSS 10-220 are characterized by their large grinding surface. A greater grinding surface goes hand in hand with a faster working progress – another advantage of this Trotec tool.

The delivery scope of the PMSS 10-220 includes a coarse 80-grit and a fine-grained 240-grit sandpaper for each sanding plate.

All-rounder with excellent guidance properties

You will search in vain if you are looking for a trigger that constantly needs to be pressed, for this grinding machine was designed for continuous operations without tiring. So all it takes for the continuous operation of the PMSS 10-220 is for you to switch it on.

This multi-purpose grinder can be directed safely and precisely even during longer, large-scale operations: the PMSS 10-220 has a perfectly positioned centre of gravity and, in addition to the main handle fitted with a soft grip rubber inlay for extra firm grip, is equipped with a guide knob enabling secure two-hand operation. To ensure the convenient accessibility during operation, the front knob also houses the setting wheel for the selection of the oscillation rate, hence it can be adjusted as needed for the respective material.

An all-round clean affair

Sanding, however excellent, always comes with a considerable amount of abrasion debris. No problem for the multi-functional sander PMSS 10-220 from Trotec, it offers two means of keeping your workplace dust-free.

For one thing: a robust dust collector with integrated filter system can be connected to the device by way of snap locks and detached as easily for emptying. Furthermore, you can also connect an external dust extraction system – all connection accessories required for this, as well as the dust collector, are already included in the standard scope of delivery.

A few practical benefits:

  • Three devices in one: delta sander,
    random orbital sander and orbital sander
  • Constantly high performance
    even under load
  • Designed for continuous operation
  • Infinitely adjustable oscillation rate
  • Simple exchange of sanding sheets thanks to Velcro® or tool-free clamping system
  • Equally suitable for both right- and left-handers
  • Plug-on dust collector with filter system
  • Connection adapter
    for external dust extraction
The PMSS 10-220 is supplied in a carry case including dust collector, adapter for the external dust extraction system, orbital sanding plate, random orbital sanding plate, delta sanding plate and two sanding sheets per attachment with a grain size of 80 and 240.
Scope of delivery of the PMSS 10-220
3-in-1 multi-functional sander PMSS 10-220
3-in-1 multi-functional sander PMSS 10-220
3-in-1 multi-functional sander PMSS 10-220

Best quality guarantee

With the PMSS 10-220 you are always on the safe side, for this multi-functional sander is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

TÜV – Tested for safety

All important features at a glance

Powerful 220 W motor
Idle speed 7,000 to 12,000 rpm
Soft start
Infinitely variable oscillation rate selection
Constantly high performance even under load
Designed for continuous operation
Tool-free exchange of accessories
Clamping system for sanding sheets
Velcro® system for sanding sheets
Attachable dust collector
Connection for external dust extraction
3-in-1 multi-functional sander
Grinding surface of the delta sanding plate: 108 cm²
Grinding surface of the orbital sanding plate: 165 cm²
Grinding surface of the random orbital sanding plate: 116 cm²
Soft grip for improved handling
3 m cable for a wide operating range
Delivered in a carry case
 
 

Brand quality plus cost-efficiency

3-in-1 multi-functional sander PMSS 10-220

So far, you basically only had two options when choosing a multi-functional sander: either good but expensive, or mainly cheap.

Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!


The key equipment features of the PMSS 10-220 at a glance

The ergonomically shaped device equipped with non-slip soft grip inlays is designed for continuous operation: Just switch it on and start working.
Ergonomic design for continuous operation
The oscillation rate of the PMSS 10-220 can be steplessly adjusted for material-compatible sanding operations.
Steplessly adjustable oscillation rate
All sanding plates come with a Velcro® system for the simple exchange and secure adhesion of the sanding sheets.
Velcro® system for a simple exchange of sanding sheets
The tool-free clamping system of the orbital sanding plate further permits an easy exchange of sandpaper without Velcro® backing.
Orbital sanding plate with tool-free clamping system
The scope of delivery includes 2 sanding sheets (grit 80 and 240) per plate to enable the application as random orbital sander, delta sander and angle grinder.
6 sanding sheets of different grain sizes included in the scope of delivery
A robust, attachable dust collector enables clean working without abrasive dust in the air.
Dust collector
An adapter for external dust extraction is supplied as standard.
Adapter for external dust extraction
In the PMSS 10-220 you have a delta sander, random orbital sander and orbital sander – all united in one device.
3-in-1 multi-functional sander

The multi-functional sander PMSS 10-220 is an extremely versatile tool

With the random orbital sanding plate of the PMSS 10-220 you can finely sand wood and other materials right up to the last finishing touch. Compared to the angle grinder, the random orbital sander combines a higher removal rate with a better grinding surface pattern and is not only suited for processing wood, but also to smoothen plastic or metal.
Random orbital sander for a fine grinding surface pattern
Due to its triangular shape the delta sanding plate of the PMSS 10-220 can easily be used for grinding alongside edges or in corners. As a result, e.g. old coats of paint on wooden stairs can be removed without leaving any residue.
Delta sander for working along edges and in corners
Used as orbital sander the PMSS 10-220 can demonstrate its high performance, particularly when sanding larger surfaces. Since the orbital sanding plate is fitted with a tool-free clamping system, you can use various types of sandpaper, also those without Velcro® backing.
Orbital sander for processing larger areas
In order to reduce abrasive dust in your working environment and to counteract the clogging of the sandpaper with dust, the PMSS 10-220 not only comes with a dust collector, it also features a connection facility for external dust extraction.
Connection for external dust extraction
Buy
Details
Technical data
General information
  Article number 4.450.000.051
Technical data
  Power input [W] 220
  Speed pre-selection min. [min-1] 7,000
  Speed pre-selection max. [min-1] 12,000
  Speed pre-selection combined 7,000 - 12,000 min-1
  Min. nominal oscillation rate [min-1] 14,000
  Max. nominal oscillation rate [min-1] 24,000
  Nominal oscillation rate combined 14,000 min-1 - 24,000 min-1
  Orbit diameter [mm] 2
  Grinding surface Delta sanding plate [cm²] 108
  Grinding surface Orbital sanding plate [cm²] 165
  Grinding surface Random orbital sanding plate [cm²] 116
Electrical values
  Mains connection 230 - 240 V/50 Hz
Electric connection
  Connection plug CEE 7/17 (shaped plug)
  Cable length [m] 3
Sound values according to EN 60,745
  Sound pressure level [dB(A)] 74.8
  Sound power level [dB] 89.4
  Uncertainty K 3
Vibration information according to EN 60,745
  Vibration emission value (ah) Main handle [m/s²] 6.732
  Vibration Value K Main handle [m/s²] 1.5
Safety feature
  Protection class II
Dimensions
  Length (packaging excluded) [mm] 80
  Width (packaging excluded) [mm] 220
  Height (packaging excluded) [mm] 170
Weight
  (packaging excluded) [kg] 1.5
Standard scope of delivery
Accessories scope of delivery
  Orbital sanding plate
  Random orbital sanding plate
  Delta sanding plate
  Sanding sheet for wood 3 sanding sheets (grain size 80), 3 sanding sheets (grain size 240)
  Dust collection box
  Reducer
  Transport case
Equipment, features and functions
Functions and features
  ON/OFF switch
  Continuous operation
  Infinitely variable nominal oscillation rate
  Abrasive belt change by means of tool-free clamping system
  Abrasive belt change by means of Velcro system
  Attachable dust collector with filter system

 standard equipment

 optionally available

 not available

Accessories
Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany show in Trotec online shop

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany

The essential accessories for electric heaters, humidifiers, air-conditioning units etc.: Pro extension cable at a length of 20 m and with a supply voltage of 230 V. All that and it's made in Germany!

32.87 £ incl. VAT
Show net price (VAT not included)

buy

Alternative products
Downloads
The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Data privacy statement  |  Sitemap
Social