Oil heater fan IDE 60 D
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDE series
  5. IDE 60 D

Oil heater fan IDE 60 D

The integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth!

Oil heater fan IDE 60 D
Oil heater fan IDE 60 D
Oil heater fan IDE 60 D

Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for.

Our response: The oil heater fan IDE 60 D.

This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

The external fuel filter provides easy access and the current fuel volume can easily be read on the filling level indication integrated in the tank – firing of the oil heater fan IDE 60 D can variably be realized with diesel or fuel oil.

In addition to the integrated thermostat, an external thermostat is optionally available as accessory for temperature control; it can also measure the temperature of a place to be heated which is located up to 25 metres away from the oil heater fan.

IDE direct oil heaters – 100 % heating power for outdoor areas

The direct oil heaters of the IDE series are optimally suited for outdoor use, e.g. for heating outdoor construction sites and agricultural areas, or for use inside well-ventilated interior spaces, for they emit 100 % of the heat they produce. Hence, direct heaters also have no chimney. Or in other words, this process yields a heating power efficiency of 100 %.

In a directly heated system the fan blowing out the heated air also brings along combustion air.

First, fuel is atomised, ignited and burned in the combustion chamber. Then the hot gases are admixed to the main air current of the fan in accurate proportions.

In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.

Since plenty of moisture is released during combustion, direct heaters should never be used for construction drying.

Schematic diagram direct heaters

Special equipment features

The operating elements of the IDE 60 D are well-arranged centrally on one side of the device. As a result you can always access the operating switch, the analogue thermostat and the connection for an external thermostat.
Oil heater fan IDE 60 D
The temperature can be adjusted as required via a stepless thermostat control.
Analogue thermostat control
The filling level of the integrated fuel tank can be checked anytime via the standard liquid level indication.
Tank filling level indication
The oil heater fan IDE 60 D is equipped with a connection for an external thermostat if the temperature is to be measured and controlled at a location to be heated that is up to 25 metres away (a thermostat is optionally available).
Connection for an external thermostat

To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

A few practical benefits:

  • Particularly economic solution for standard oil heating
  • Integrated fuel tank with filling level indication
  • Electronic flame trap
  • Overheating protection
  • Stainless steel combustion chamber
  • Integrated thermostat
  • Connection for external thermostat
  • Carriage for easy change of location
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Technical data by comparison

All IDE oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Direkt-Ölheizgebläse IDE 60 D show in Trotec online shop

Direkt-Ölheizgebläse IDE 60 D

You save: 19.99 €

619.94 € 599.95 € incl. VAT Show net price (VAT not included)


Technical data

Technical data
General information
  Article number 1.430.000.074
Functional principle
  Method of heating direct
  Method of heating indirect
Air flow rate
  Level Max. [m³/h] 1,100
Nominal heat output
  Level Max. [kW] 60
  Level Max. [kcal] 51,600
Temperature increase
  Level Max. [°C] 150
Electrical values
  Mains connection 230 V/50 Hz
  Current consumption [A] 1.5
  Power input [kW] 0.34
  Heating capacity [kW] 60
Electric connection
  Connection plug CEE 7/7 (plug type F + E)
  Cable length [m] 1.2
  Internal thermostat
  Connection for external thermostat
  Overheating protection
  Temperature indication
Fuel feed
  Fuel feed Compressor
Oil consumption
  Level Max. [l/h] 5.7
Tank contents
  Content in [l] 56
Chimney connection
  Diameter [mm]
Sound values
  Distance 1 m [dB(A)] 78
Suitable fuels
  EL fuel oil
  Low-sulphur EL fuel oil
  Length (packaging excluded) [mm] 1,050
  Width (packaging excluded) [mm] 490
  Height (packaging excluded) [mm] 615
  (packaging excluded) [kg] 27.5
Equipment, features and functions
  Plastic wheels
  Carry/transport handle(s)
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels
Housing design

 standard equipment

 optionally available

 not available



Alternative products