Commercial dehumidifier TTK 166 ECO
Highly efficient. Extremely robust. Incredibly low-priced.
Particularly economical solution for typical dehumidification applications in the commercial sector
When it comes to efficiency, hardly any other device can keep up with the low-cost solution TTK 166 ECO. The dehumidifier manages about 52 litres in 24 hours – an impressive drying performance for the commercial sector.
The current room air humidity and temperature can be easily read from its large digital display both in standby and dehumidification mode. The desired relative room air humidity can be set to values between 10 % and 95 % in steps of 1. Hence, humidity-dependent drying control is not a problem thanks to the integrated hygrostat.
The striking signal red paint makes it impossible to overlook the dehumidifier on any construction site. Thanks to the carriage design with a transport handle and large wheels, the TTK 166 ECO can be moved without difficulty even in the often harsh surroundings on construction sites. A practical cable holder at the rear of the device allows you to safely stow the power cable during transport and storage.
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
The timer function for switch-on/-off at a preselected time, the large 7-litre water tank and the indication for automatic defrost complete the range of features of this efficient dehumidifier. Moreover, the TTK 166 ECO is equipped with an external condensate drain (condensate pump optionally available), and is thus perfectly suited for longer unattended drying operations. Thanks to the memory function the dehumidifier memorizes the desired relative room humidity during short power failures. As soon as the power supply is restored, the TTK 166 ECO restarts automatically.
Due to the efficient rotary piston compressor, the device can be transported and stored in any position.
All commercial dehumidifiers of the TTK-ECO series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-ECO series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Particularly economical solution for typical dehumidification applications in the commercial sector
- GS-tested quality
- High dehumidification performance
- Robust steel construction in carriage design
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
The TTK 166 ECO with a maximum dehumidification capacity of 52 l / day with an expelled air volume of 300 m³ / h. The handle-bar mounted on the dehumidifier and the large transport wheels provide the necessary mobility in every situation.
Sie sparen: 205.12 €
597.84 € 392.72 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|At 30 °C / 80 % RH [l/24h]||50|
|Air flow rate|
|Level Max. [m³/h]||300|
|Recommended room size dry keeping|
|Min. temperature range [°C]||5|
|Max. temperature range [°C]||35|
|Min. humidity range [% RH]||10|
|Max. humidity range [% RH]||95|
|Mains connection||220 - 240 V/50 Hz|
|Nominal current consumption [A]||4|
|Power input [kW]||0.95|
|Recommended fusing [A]||10|
|Required current starting phase [A]||16|
|Connection plug||CEE 7/7|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||200|
|Pressure suction side [MPa]||1|
|CO2 equivalent||0.0006 t|
|Pressure outlet side [MPa]||2.5|
|Max. permissible pressure [Mpa]||2.5|
|Contents in [l]||7|
|Level 1 - Distance 1 m [dB(A)]||56|
|Length (packaging excluded) [mm]||480|
|Width (packaging excluded) [mm]||450|
|Height (packaging excluded) [mm]||655|
|(packaging excluded) [kg]||30|
|Equipment, features and functions|
|Automatic defrost system|
|Air circulation / electronic|
|Condensate tank monitoring|
|Overflow protection with automatic switch-off|
|Filling level warning light to indicate a full water tank|
|Room air filter|
|Switch-on time preselectable|
|Switch-off time can be preselected|
|Operating hours counter|
|Operating hours counter|
|Non-marking full-rubber wheels|
|Hose connection possible|
|Hose included in the scope of delivery|
|Recommended hose size [mm]||13 mm|
|Touchscreen control panel|