Commercial dehumidifier TTK 380 ECO
Economy-priced first-class construction dryer!
The TTK 380 ECO is the first dehumidifier choice for the smart shopper looking for a budget-friendly, yet commercially applicable dehumidifier with professional performance characteristics.
The ECO concept of this dehumidifier series by Trotec facilitates both: By focussing on the essentials the TTK 380 ECO takes a pass on unnecessary decorative accessories in favour of more advantageous properties for non-destructive continuous dry keeping and dehumidification operations.
Behind the robust steel construction in carriage design, a powerful rotary piston compressor ensures a high dehumidification performance. And combined with its professional hot gas defrost system the TTK 380 ECO can impress with a high drying capacity even at low room temperatures.
The transportation from one operating site to another can be accomplished both effectively and safely, for owing to large wheels and the convenient push handle the TTK 380 ECO handles even difficult courses across construction sites in a breeze. Two integrated cable holders and a plug holder make sure that no trip hazards are created.
To determine the period of application, the TTK 380 ECO comes equipped with an operating hours counter. Furthermore, a connection socket for an external hygrostat permits the humidity-dependent device control.
Along with the external condensate drain this renders the TTK 380 ECO an ideal dehumidifier for longer unattended drying applications in automatic operation.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
A few practical benefits:
- Particularly economical solution for typical dehumidification applications in the commercial sector
- High dehumidification performance even at low temperatures
- Robust steel construction in carriage design
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
All commercial dehumidifiers of the TTK-ECO series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-ECO series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
The dehumidifier TTK 380 ECO with a maximum dehumidification capacity of 80 l / day with an expelled air volume of 950 m³ /h. In addition, the TTK 380 ECO has an operating hours counter and the possibility to drain the accumulating condensate via an external hose.
Sie sparen: 455.48 €
1,049.40 € 593.92 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|At 20 °C / 60 % RH [l/24h]||30|
|At 30 °C / 80 % RH [l/24h]||79|
|Air flow rate|
|Level Max. [m³/h]||950|
|Recommended room size dry keeping|
|Min. temperature range [°C]||5|
|Max. temperature range [°C]||32|
|Min. humidity range [% r.F.]||30|
|Max. humidity range [% r.F.]||90|
|Mains connection||220 - 240 V/50 Hz|
|Nominal current consumption [A]||4.2|
|Power input [kW]||0.95|
|Recommended fusing [A]||10|
|Connection plug||CEE 7/7|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||300|
|Pressure suction side [MPa]||1|
|CO2 equivalent||0.00069 t|
|Pressure outlet side [MPa]||2.5|
|Max. permissible pressure [Mpa]||2.5|
|Contents in [l]||9.5|
|Level 1 - Distance 1 m [dB(A)]||65|
|Length (packaging included – handle excluded) [mm]||530|
|Width (packaging included – handle excluded) [mm]||575|
|Height (packaging included – handle excluded) [mm]||1,060|
|(packaging excluded) [kg]||50|
|Equipment, features and functions|
|Automatic defrost system|
|Condensate tank monitoring|
|Overflow protection with automatic switch-off|
|Filling level warning light to indicate a full water tank|
|Room air filter|
|Switch-off time can be preselected|
|Switch-on time preselectable|
|Operating hours counter|
|Operating hours counter|
|Non-marking full-rubber wheels|
|Adjustable bar handle|
|Swivel casters with parking brakes|
|Rubber-tyred metal wheels|
|Hose connection possible|
|Hose included in the scope of delivery|
|Metal plastic composite housing|