Commercial dehumidifier TTK 170 S
Powerful technology for workshops, storage spaces and construction sites
The universal all-rounder!
Whether for drying after water damage, construction drying or dry keeping of heated or unheated storage and work rooms, with this universal dehumidifier you can benefit from a budget-friendly dehumidification solution without compromising in terms of workmanship or reliability.
For behind the price tag on a Far East level, there is a robust metal plate from traditional EU manufacturing accommodating tried and tested brand technology that runs and runs and runs. Easy-care, low-maintenance, reasonably priced.
The TTK 170 S is equipped with a professional hot gas automatic defrost system and dehumidifies rooms with a size of up to 180 m² and a performance of up to 50 litres in 24 hours. This high-performance construction dryer is hygrostat-controlled. The desired humidity level can be preselected between 32 % and 100 % RH using the practical rotary switch. Furthermore it generates an air volume of 580 cubic metres per hour. Thanks to its stable carriage construction and the large impellers you can easily and frequently change its application site.
Permanent mode for construction drying applications
The possibility of connecting an external condensate drain – if required with an optional condensate pump – also makes the TTK 170 S ideally suitable for longer unattended dry keeping tasks, e.g. for construction drying.
Safe and powerful!
The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position. The condensation tank indicator light lights up when the condensation tank is full. In addition, the TTK 170 S switches off automatically when the water tank is full.
Inside, a professional hot gas automatic defrost system guarantees effective dehumidification result even at low temperatures, and thanks to the external condensate drain integrated as standard the TTK 170 S is also suited for longer unattended continuous drying applications and for construction drying.
The TTK 170 S is exclusively available only at Trotec and can be optionally delivered with an integrated operating hours counter or MID-compliant dual counter for operation hours and kilowatt hours.
What does MID-compliant mean?
In some areas, the Measuring Instruments Directive (MID) replaces the previous regulation of national authorization and subsequent calibration. As a result, all energy meters in Europe used for energy consumption-based billing have to be MID-compliant from now on.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance even at low temperatures
- Robust plastic-coated metal housing
- Portable and easily stored anywhere thanks to its rotary compressor
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
All commercial dehumidifiers of the TTK-S series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
Quality Made by Trotec: not made in China. TTK 170 S: max. 50 litres dehumidification performance. Produced in Europe and available exclusively at Trotec. This dehumidifier can stand up to the highest of demands and the harshest of conditions.
You save: 79.54 €
871.32 € 791.78 € incl. VAT Show net price (VAT not included)
|At 30 °C / 80 % RH [l/24h]||40|
|Air flow rate|
|Level Max. [m³/h]||580|
|Recommended room size dry keeping|
|Min. temperature range [°C]||5|
|Max. temperature range [°C]||32|
|Min. humidity range [% RH]||50|
|Max. humidity range [% RH]||90|
|Mains connection||220 - 240 V/50 Hz|
|Nominal current consumption [A]||2.8|
|Power input [kW]||0.6|
|Recommended fusing [A]||10|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||150|
|Pressure suction side [MPa]||1.1|
|Pressure outlet side [MPa]||3.1|
|Max. permissible pressure [Mpa]||3.1|
|Contents in [Litres]||6|
|Distance 1 m [dB(A)]||52|
|Functions and features|
|Operating control lamp|
|Room temperature sensor|
|Fan rundown function|
|Laundry drying function|
|Internal drying function|
|Length (packaging excluded) [mm]||540|
|Width (packaging excluded) [mm]||490|
|Height (packaging excluded) [mm]||963|
|(packaging excluded) [kg]||32|
|Equipment, features and functions|
|Automatic defrost system|
|Condensate tank monitoring|
|Overflow protection with automatic switch-off|
|Filling level warning light to indicate a full water tank|
|Room air filter|
|Operating hours counter|
|Operating hours counter|
|Non-marking full-rubber wheels|
|Rubber-tyred metal wheels|
|Swivel casters with parking brakes|
|Hose connection possible|
|Hose included in the scope of delivery|
|Recommended hose size [mm]||19|
|Metal plastic composite housing|