TTK 125 S commercial dehumidifier
“Nobody can offer as many litres at this weight”
Good things come in small packages: Power pack TTK 125 S
The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype.
The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions.
Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:
Compared to cheaper reciprocating compressors, the high-quality 0.58 kW rotary compressor of the TTK 125 S offers the advantage of higher performance with comparatively lower power consumption – and creates additional reserves for high dehumidification performance even in unheated rooms.
As well as this, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 125 S guarantees a much more efficient dehumidification performance without pausing on a time interval during which no dehumidification occurs!
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
The top drying performer of its power to weight class
This innovative condenser dryer can dehumidify impressive 32 litres within 24 hours. Astounding for a robust and compact package which only weighs 26 kilograms.
In practice, the TTK 125 S seems much lighter than that, because its robust Trotec ergonomic recessed handles with an inner Grip-Clip provide an optimal hold while carrying. With its four sturdy swivel casters with wheel locks, tight construction sites are no problem.
Even in storage, the TTK 125 S makes a good impression – because it only needs surprisingly little space. Due to its two practical stacking grooves on top, equally sized TTK-S devices can be safely stacked to save space during transport and storage.
As with all commercial dehumidifiers of the TTK-S series, the TTK 125 S has a built in operating hours counter which records the precise duration of work accurately and reliably. A dual counter for additional detection of power consumption is optionally available.
TTK 125 S – special equipment features
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance even at low temperatures
- Maximum dust and dampness protection for all electrical components
- Very easy to maintain construction
- Optimal handling
- Portable and easily stored anywhere thanks to its rotary compressor
- Practical stacking groove for stable, space-saving storage and transport
- Stackable with equally dimensioned models
- Tried and tested German industrial design – protected prototype
Accessory tip:
Installation condensate pump for continuous operation
Suitable for all TTK-S models, a plug-in condensate pump is also optionally available, which can be installed very easily instead of the collection container and allows for automatic condensate discharge via the 5-m drain hose supplied. With a pump performance up to a distance of 50 m and a maximum delivery head of 4.3 metres, this pump is ideally suitable for longer unattended dry keeping applications in continuous operation – just add it to your order right away!
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Fan assistance
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axial fans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
All Commercial dehumidifiers of the TTK-S series in direct comparison:
To find the Commercial dehumidifier of the TTK-S series which exactly meets your requirements, please consult the concise overview of all Commercial dehumidifiers of the TTK-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
Shop
Luftentfeuchter TTK 125 S
1,065.05 € incl. VAT Show net price (VAT not included)
Daily rent:
7.14 €
incl. VAT
per day
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.120.000.124 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 11 | |
| At 30 °C / 80 % RH [l/24h] | 28 | |
| Max. [l/24h] | 32 | |
| Air flow rate | ||
| Level Max. [m³/h] | 250 | |
| Recommended room size construction drying | ||
| m³ | 150 | |
| m² | 60 | |
| Recommended room size dry keeping | ||
| m³ | 300 | |
| m² | 120 | |
| Ambient conditions | ||
| Min. temperature range [°C] | 5 | |
| Max. temperature range [°C] | 32 | |
| Min. humidity range [% RH] | 50 | |
| Max. humidity range [% RH] | 90 | |
| Electrical values | ||
| Mains connection | 220 - 240 V/50 Hz | |
| Nominal current consumption [A] | 2.3 | |
| Power input [kW] | 0.5 | |
| Recommended fusing [A] | 10 | |
| Compressor | ||
| Rotary piston compressor | ||
| Reciprocating piston compressor | ||
| refrigerant | R290 | |
| Amount of refrigerant [g] | 150 | |
| GWP factor | 3 | |
| CO2 equivalent | 0.00045 | |
| Pressure suction side [MPa] | 0.6 | |
| Pressure outlet side [MPa] | 2.1 | |
| Max. permissible pressure [Mpa] | 3 | |
| Water tank | ||
| Contents in [Litres] | 6 | |
| Sound values | ||
| Distance 1 m [dB(A)] | 52 | |
| Functions and features | ||
| Automatic fault diagnosis system | ||
| Operating control lamp | ||
| Room temperature sensor | ||
| Automatic switch-off | ||
| Operating button for draining residual water | ||
| Auto restart function | ||
| Memory function | ||
| Fan rundown function | ||
| Laundry drying function | ||
| Selectable ionisation | ||
| Internal drying function | ||
| Child lock | ||
| Night mode | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 375 | |
| Width (packaging excluded) [mm] | 345 | |
| Height (packaging excluded) [mm] | 603 | |
| Weight | ||
| (packaging excluded) [kg] | 26 | |
| Equipment, features and functions | ||
|---|---|---|
| Automatic defrost system | ||
| Hot gas | ||
| Electronic | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Analogue hygrostat | ||
| Hygrostat-controlled | ||
| Electronic hygrostat | ||
| Program-controlled | ||
| Fan | ||
| axial | ||
| Radial | ||
| stages | 1 | |
| Condensate tank monitoring | ||
| Container available | ||
| Overflow protection with automatic switch-off | ||
| Filling level warning light to indicate a full water tank | ||
| Room air filter | ||
| Readily accessible | ||
| Cleanable | ||
| Ionizer selectable | ||
| Operating hours counter | ||
| Operating hours counter | ||
| Power meter | ||
| Mobility | ||
| Rubber-tyred metal wheels (non marking) | ||
| Carry/transport handle(s) | ||
| Swivel casters with parking brakes | ||
| Plastic wheels | ||
| Non-marking full-rubber wheels | ||
| Adjustable bar handle | ||
| Condensate drain | ||
| Hose connection possible | ||
| Hose included in the scope of delivery | ||
| Condensate pump | ||
| Recommended hose size [mm] | 19 | |
| Control panel | ||
| Protective bar | ||
| Digital display | ||
| Comfort button | ||
| Shelf life | ||
| stackable | ||
| Housing design | ||
| Steel coated | ||
| Plastics | ||
| Stainless steel | ||
| Metal plastic composite housing | ||
| Aluminium | ||
standard equipment
optionally available
not available