Industrial condenser dryer DH 145 SH
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Dehumidification
  4. Condensation dehumidifiers, stationary
  5. Industrial dryers of the DH-S series
  6. DH 145 SH

Industrial condenser dryer DH 145 SH

The ultimate industrial condensation dryer DH 145 SH with an analogue hygrostat dehumidifies an enormous 475 liters per day

Industrial condenser dryer DH 145 SH
Industrial condenser dryer DH 145 SH
Industrial condenser dryer DH 145 SH

Reliable dryer with high dehumidification capacity

Owing to its high dehumidification performance of up to 475 litres per day, this standard industrial dryer is a particularly economical solution for keeping stored goods dry and to prevent damages caused by mould as well as corrosion during industrial processes.

This condenser dryer's standard equipment includes a hot gas automatic defrost system, an integrated condensate pump with a pump height of up to 4 metres, a residual water draining function as well as pressure gauge indicators for a maintenance-friendly early fault detection. Moreover, the DH 145 SH is fitted with modularly refined electrical equipment and pipes containing water according to European standard – all manually finished and quality-controlled at Trotec in Germany.

Investment protection for your drying devices

Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...

Technical construction drying

Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...

A permanent air dehumidification with the DH 145 SH offers the following advantages:

  • Prevention of damages caused by mould as well as corrosion
  • Prevention of condensation formation
  • Protection against damages on building structure, production facilities and inventory caused by moisture
  • Increased reliability of electrical equipment
  • Dehumidification for process optimization in the industry
  • Protection and preservation of valuable goods
  • Reduction of unpleasant odours
  • Reduced heating costs due to optimized humidity
  • Noiseless and effective dry keeping

DH 145 SH - Special equipment features

DH 145 SH - Dimensions
The compact DH 145 SH industrial dehumidifier dries up to 475 litres per day.
Control panel DH 145 SH
The central control panel of the DH 145 SH permits a quick and convenient configuration of the dehumidifier.
Pressure gauge displays DH 145 SH
For each compressor, the refrigerant pressure is determined by the DH 145 SH on the discharge and suction side and indicated by a pressure gauge.
Condensate drain DH 145 SH
For longer continuous use or unattended dehumidification, the enclosed condensate drain hose should be connected to the unit.
Optional swivel castors
The DH 145 SH is optionally available with additional swivel castors on the robust skids.

Application examples from practical experience:

DH-S series - Application warehouse
With the DH-S standard series, you can cost-effectively protect stored goods from moisture damage.
DH-S series - Production application
With the DH-S standard series, you can cost-effectively protect production facilities from moisture damage.
DH-S series - Construction site application
With the DH-S standard series, you can cost-effectively protect building structures from moisture damage.
DH-S-Series - Application Inventory Protection
With the DH-S standard series, you can cost-effectively protect inventory from moisture damage.

All Industrial dryers of the DH-S series in direct comparison:

To find the industrial dryer which exactly meets your requirements, please consult the concise overview of all Industrial dryers of the DH-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Reliable dryer with high dehumidification capacity
  • Particularly economical solution for typical dry keeping in production facilities and storerooms
  • With an integrated condensate pump as standard
  • Pressure gauge indicators for a maintenance-friendly early detection of faults
  • Modular refinement of electrical equipment and components containing water according to European standard – handmade in Germany
  • Optimum value-for-money ratio

Make use of our best practice industrial services

You can count on our experts

In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.

Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.

During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.

Trotec is the only provider of this advantage:

Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.

Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!

Make use of Trotec's best practice industrial services

Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.

Shop

Industrie-Kondenstrockner DH 145 SH show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.125.000.224
Dehumidification performance
  At 20 °C / 60 % RH [l/24h] 193
  At 30 °C / 80 % RH [l/24h] 485
Air flow rate
  Level Max. [m³/h] 4,300
Operating range
  Min. temperature [°C] 5
  Max. temperature [°C] 32
  Min. humidity [% RH] 30
  Max. humidity [% RH] 90
Electrical values
  Mains connection 400 V/50 Hz
  Nominal current consumption [A] 16.6
  Power input [kW] 9.8
  Required current starting phase [A] 17
  Recommended fusing [A] 32
Electric connection
  Connection plug CEE 32 A phase inverter connector
  Cable length [m] 3
Compressor
  refrigerant R-407C
  Amount of refrigerant [g] 3,200
  GWP factor 1,774
  CO2 equivalent 5.68
  Pressure outlet side [MPa] 0.8
  Pressure suction side [MPa] 2.5
Sound values
  Distance 1 m [dB(A)] 68.5
  Distance 3 m [dB(A)]
Dimensions
  Length (packaging excluded) [mm] 460
  Width (packaging excluded) [mm] 1,195
  Height (packaging excluded) [mm] 1,730
Weight
  (packaging excluded) [kg] 235
Equipment, features and functions
Mobility
  Forklift
  Carry/transport handle(s)
  Plastic wheels
  Non-marking full-rubber wheels
  Adjustable bar handle
  Rubber-tyred metal wheels
  Swivel casters with parking brakes
Automatic dehumidification
  Non-stop dehumidification
  Analogue hygrostat
  Hygrostat-controlled
  Program-controlled
Automatic defrost system
  Hot gas
  Electronic
Hygrostat
  Internal
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Condensate pump
  Recommended hose size [mm] 15
Condensate pump
  Available
  Pump height [m] 5
  Max. conveying capacity [l/h] 250

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...