Professional Trotec solutions for virus filtration and air pollution control – model variants and special solutions
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Air purification
  4. High-performance air purifier TAC V+
  5. Model variants and special solutions

Effective virus air purification: Model variants and special solutions

Professional Trotec solutions for virus filtration and air pollution control

Trotec high-performance air purifiers: TAC XT, TAC V+, TAC M and TAC ECO

No other method than the HEPA high-performance filter technology provides "as much clean air for quickly diluting the aerosol clouds" with increased safety for the optimum price/clean air ratio!

To ensure that you're always provided with the precisely-tailored Trotec solution for effective virus filtration of the room air, exactly adapted to your individual safety requirement, in addition to the high-performance air purifier TAC V+ our range of products contains further model variants and special solutions.

To help you integrate the TAC V+ into the respective application environment, in addition to the standard colour yellow, this device is also available painted in the colours basalt grey, white or bronze.

Moreover, a stainless steel version is available for the use in hygiene-sensitive areas – and for virus air filtration in large halls we can offer you the special model TAC V+ Dual for wall or ceiling mounting, which blows out clean air to both sides.

100 % TAC V+ on the outside, modified to meet your requirements on the inside: Model variants TAC M, TAC ECO and TAC BASIC

TAC M – TAC V+-like virus-filtered clean air
High-performance air purifier TAC ECO – virus-filtered clean air, manually adjusted
High-performance air purifier TAC Basic – the best basis for virus-filtered clean air

The model variants TAC M, TAC ECO and TAC BASIC are the perfect combination of the scientifically confirmed effective H14 HEPA virus filtration of the TAC V+ and your individual economic requirements, without having to forego any basic equipment features of the high-performance air purifier TAC V+.

The criteria for an effective virus air cleaner required by science are:

  • The device must have a sufficiently large volumetric flow. at least six times the room volume per hour
  • The device must be technically capable of removing 99.995 % of the viruses in the course of one air cycle, as can be ensured by an H14 HEPA filter complying with EN 1822
  • The device must be quiet so that it does not disturb people inside the room, otherwise there is a risk of the device being switched off by the user

All these criteria are fully met not only by the TAC V+, but also by the TAC M, TAC ECO and TAC BASIC. This is why the air cleaners TAC M, TAC ECO and TAC BASIC are our best recommendation if you want to do without the full equipment of the TAC V+, but not without effective H14 HEPA virus filtration from Trotec "made in Germany".

Since the high-performance air purifiers TAC M and TAC ECO do not have a function for thermal decontamination and filter regeneration, they can also be used in areas which, due to electrical protection, only permit automated thermal decontamination to a limited extent. Consequently, the devices come without the added value of thermal room decontamination – maximum hygiene and safety –, which is offered by the TAC V+ through cyclic heat inactivation and thermal filter self-cleaning for longer filter lifetimes.

TAC M – TAC V+-like virus-filtered clean air

Being equipped with a programmable touch display incl. USB update function just like the TAC V+, the TAC M offers you convenient configuration options. Furthermore, you also benefit from the integrated FlowMatic control for a constant air volume flow at any power level with the TAC M. On request, the TAC M can be ordered in all colours available for the TAC V+.

TAC ECO – virus-filtered clean air, manually adjusted

The TAC ECO is the perfect reduction of the TAC V+ to its essential virus filter qualities with an H14 HEPA filter standard according to EN 1822. Once manually configured, the TAC ECO, too, will automatically make you benefit from virus-filtered clean air in your rooms. The TAC ECO is only available in light grey.

TAC BASIC – the best basis for virus-filtered clean air

Being a variant of the TAC ECO, the TAC BASIC has all the basic features of the TAC ECO except for the filter change indicator, but instead of the carriage design it is equipped with lockable castors for easy transport to another room. Since the device has neither a handle nor a protective bar around the control panel, it allows for maximum space savings when set up.

Product brochure for the high-performance air purifiers TAC V + / TAC M / TAC ECO

PRODUCT BROCHURE

The solution against aerosols, viruses and bacteria in the room air. Scientifically proven effectiveness, functional principle, installation tips, performance data, model variants - all relevant information about our high-performance air purifiers TAC V + / TAC M / TAC ECO / TAC XT can also be found in the product brochure. Download the PDF directly here.

To the PDF document

Multi air handler TAC XT

For expanded fields of application of the TAC V+ beyond air pollution control, the multi air handler TAC XT was developed.

The multi air handler TAC XT is based on the same assembly as the TAC V+, which is why it is provided with an identical HEPA air purification function with filter class H14 and a filter efficiency of 99.995 %.

In addition, the multi air handler TAC XT can also be used for combined room heating as well as thermal pest control and thermal decontamination of viruses, for example for decontamination of sanitary facilities, dressing rooms, etc. during the night, or for the flexible, reliable decontamination of respiratory masks and disposable PSA equipment for multiple use.

Go directly to the multi air handler TAC XT ...

Multi air handler TAC XT for HEPA air purification, decontamination, pest control and room air heating
Multi air handler TAC XT for HEPA air purification, decontamination, pest control and room air heating with a programmable touch display

Possible applications and equipment differences of TAC high-performance air purifiers at a glance

Trotec high-performance air purifiers with HEPA H14 suitability in compliance with EN 1822 (corresponds to ISO 45 H according to ISO 29463) TAC XT TAC V+ TAC M TAC ECO TAC BASIC
TAC XT TAC V+ TAC M TAC ECO TAC BASIC
Use for high-performance H14 HEPA air purification as per EN 1822
Usage-related filter change indicator for prefilter and HEPA filter
Mobile carriage design
FlowMatic volumetric flow control
Programmable touch display updateable via USB
Thermal filter decontamination and filter regeneration
Use for room heating, tent heating (heating capacity 18/27 kW)
Use for thermal decontamination of rooms and objects
Use for thermal disinfestation
Trotec high-performance air purifiers with HEPA H14 suitability in compliance with EN 1822 (corresponds to ISO 45 H according to ISO 29463) TAC XT TAC V+ TAC M TAC ECO TAC BASIC
Use for high-performance H14 HEPA air purification as per EN 1822
Usage-related filter change indicator for prefilter and HEPA filter
Mobile carriage design
FlowMatic volumetric flow control
Programmable touch display updateable via USB
Thermal filter decontamination and filter regeneration
Use for room heating, tent heating (heating capacity 18/27 kW)
Use for thermal decontamination of rooms and objects
Use for thermal disinfestation

TAC high-performance air purifiers – show more technical data

TAC high-performance air purifiers – more technical data at a glance TAC XT TAC V+ TAC M TAC ECO TAC BASIC
TAC XT TAC V+ TAC M TAC ECO TAC BASIC
Max. air flow rate heating (without HEPA filter) 2,500 m³/h - - - -
Max. air volume flow for the respective filter class with standard HighFlow H14 HEPA Heat Resistant filter:
H14 ≤ 1,200 m³/h, H13 ≤ 1,800 m³/h,
with optional Ultra-HighFlow H14 HEPA filter:
H14 ≤ 2,000 m³/h, H13 ≤ 2,200 m³/h
H14 ≤ 1,000 m³/h
H13 ≤ 1,600 m³/h
Prefilter F7 (EN 779:2002), ePM10 85 % (ISO 16890) G4 Z-line
(EN 779:2002)
High-temperature particulate air filter TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822
Fully encapsulated H14 HighFlow metal lamellae high-temperature filter 'made in Germany'
(optional also as Ultra-HighFlow filter).
Each filter is tested and certified individually.
TROTEC HEPA H14, EN 1822
(standard minipleat)
Each filter is tested and certified individually.
Filter change interval approx. 2 to 3 years
(depending on the application and with regular thermal decontamination)
approx. 1 to 2 years
(depending on the application)
approx. 1 year
(depending on the application)
Filter change indication Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter -
FlowMatic control Constant clean air volume flow,
constant circulation rates in each power level

also with increasing filter contamination. Air volume freely adjustable in m³.
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
Time freely programmable,
the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours.
Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required.

Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination.
No thermal decontamination and
reconditioning of the filter
Mains connection (connector plug) 380–480 V 50 / 60 Hz (CEE 32 A) 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F)
ø power consumption Air purification: 0.16 kW*, 2.5 kW (short-term peak load, e.g. once a week during thermal decontamination)
heating: max. 27 kW
0.16 kW*,
2.5 kW (short-term peak load, e.g. once a week during thermal decontamination)
0.16 kW*
Exemplary total energy consumption
(with 900 m³/h air volume)
Without thermal decontamination approx. 1.6 kWh per day / approx. 35 kWh per month*

With thermal decontamination approx. 1.8 kWh per day / approx. 39 kWh per month
* and thermal decontamination once a week
approx. 1.6 kWh per day /
approx. 35 kWh per month*
Control panel Programmable, USB updateable touch display with PIN-protected lock function Manual control panel
(6-step switch)
Weight 96 kg (incl. filter) 89 kg (incl. filter) 84 kg (incl. filter) 85 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume
TAC XT
Max. air flow rate heating (without HEPA filter)
2,500 m³/h
Max. air volume flow for the respective filter class
with standard HighFlow H14 HEPA Heat Resistant filter:
H14 ≤ 1,200 m³/h, H13 ≤ 1,800 m³/h,
with optional Ultra-HighFlow H14 HEPA filter:
H14 ≤ 2,000 m³/h, H13 ≤ 2,200 m³/h
Prefilter
F7 (EN 779:2002), ePM10 85 % (ISO 16890)
High-temperature particulate air filter
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822
Fully encapsulated H14 HighFlow metal lamellae high-temperature filter 'made in Germany'
(optional also as Ultra-HighFlow filter).
Each filter is tested and certified individually.
Filter change interval
Approx. 2 to 3 years
(depending on the application and with regular thermal decontamination)
Filter change indication
Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter
FlowMatic control
Constant clean air volume flow,
constant circulation rates in each power level

also with increasing filter contamination. Air volume freely adjustable in m³.
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
Time freely programmable,
the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours.
Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required.

Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination.
Mains connection (connector plug)
380–480 V 50 / 60 Hz (CEE 32 A)
ø power consumption
Air purification: 0.16 kW*, 2.5 kW (short-term peak load, e.g. once a week during thermal decontamination)
heating: max. 27 kW
Exemplary total energy consumption
(with 900 m³/h air volume)
Without thermal decontamination approx. 1.6 kWh per day / approx. 35 kWh per month*

With thermal decontamination approx. 1.8 kWh per day / approx. 39 kWh per month
* and thermal decontamination once a week
Control panel
Programmable, USB updateable touch display with PIN-protected lock function
Weight
96 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume
TAC V+
Max. air flow rate heating (without HEPA filter)
-
Max. air volume flow for the respective filter class
with standard HighFlow H14 HEPA Heat Resistant filter:
H14 ≤ 1,200 m³/h, H13 ≤ 1,800 m³/h,
with optional Ultra-HighFlow H14 HEPA filter:
H14 ≤ 2,000 m³/h, H13 ≤ 2,200 m³/h
Prefilter
F7 (EN 779:2002), ePM10 85 % (ISO 16890)
High-temperature particulate air filter
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822
Fully encapsulated H14 HighFlow metal lamellae high-temperature filter 'made in Germany'
(optional also as Ultra-HighFlow filter).
Each filter is tested and certified individually.
Filter change interval
Approx. 2 to 3 years
(depending on the application and with regular thermal decontamination)
Filter change indication
Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter
FlowMatic control
Constant clean air volume flow,
constant circulation rates in each power level

also with increasing filter contamination. Air volume freely adjustable in m³.
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
Time freely programmable,
the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours.
Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required.

Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination.
Mains connection (connector plug)
220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F)
ø power consumption
0.16 kW*,
2.5 kW (short-term peak load, e.g. once a week during thermal decontamination)
Exemplary total energy consumption
(with 900 m³/h air volume)
Without thermal decontamination approx. 1.6 kWh per day / approx. 35 kWh per month*

With thermal decontamination approx. 1.8 kWh per day / approx. 39 kWh per month
* and thermal decontamination once a week
Control panel
Programmable, USB updateable touch display with PIN-protected lock function
Weight
89 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume
TAC M
Max. air flow rate heating (without HEPA filter)
-
Max. air volume flow for the respective filter class
with standard HighFlow H14 HEPA Heat Resistant filter:
H14 ≤ 1,200 m³/h, H13 ≤ 1,800 m³/h,
with optional Ultra-HighFlow H14 HEPA filter:
H14 ≤ 2,000 m³/h, H13 ≤ 2,200 m³/h
Prefilter
F7 (EN 779:2002), ePM10 85 % (ISO 16890)
High-temperature particulate air filter
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822
Fully encapsulated H14 HighFlow metal lamellae high-temperature filter 'made in Germany'
(optional also as Ultra-HighFlow filter).
Each filter is tested and certified individually.
Filter change interval
Approx. 1 to 2 years (depending on the application)
Filter change indication
Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter
FlowMatic control
Constant clean air volume flow,
constant circulation rates in each power level

also with increasing filter contamination. Air volume freely adjustable in m³.
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
No thermal decontamination and
reconditioning of the filter
Mains connection (connector plug)
220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F)
ø power consumption
0.16 kW*
Exemplary total energy consumption
(with 900 m³/h air volume)
approx. 1.6 kWh per day /
approx. 35 kWh per month*
Control panel
Programmable, USB updateable touch display with PIN-protected lock function
Weight
84 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume
TAC ECO
Max. air flow rate heating (without HEPA filter)
-
Max. air volume flow for the respective filter class
H14 ≤ 1,000 m³/h
H13 ≤ 1,600 m³/h
Prefilter
G4 Z-line (EN 779:2002)
High-temperature particulate air filter
TROTEC HEPA H14, EN 1822
(standard minipleat)
Each filter is tested and certified individually.
Filter change interval
Approx. 1 year (depending on the application)
Filter change indication
Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter
FlowMatic control
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
No thermal decontamination and
reconditioning of the filter
Mains connection (connector plug)
220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F)
ø power consumption
0.16 kW*
Exemplary total energy consumption
(with 900 m³/h air volume)
approx. 1.6 kWh per day /
approx. 35 kWh per month*
Control panel
Manual control panel (6-step switch)
Weight
84 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume
TAC BASIC
Max. air flow rate heating (without HEPA filter)
-
Max. air volume flow for the respective filter class
H14 ≤ 1,000 m³/h
H13 ≤ 1,600 m³/h
Prefilter
G4 Z-line (EN 779:2002)
High-temperature particulate air filter
TROTEC HEPA H14, EN 1822
(standard minipleat)
Each filter is tested and certified individually.
Filter change interval
Approx. 1 year (depending on the application)
Filter change indication
FlowMatic control
Safety and filter hygiene:
Thermal decontamination and filter regeneration at approx. 100 °C.
15 min. heating-up phase /
15 min. decon phase (altogether 30 min.)
No thermal decontamination and
reconditioning of the filter
Mains connection (connector plug)
220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F)
ø power consumption
0.16 kW*
Exemplary total energy consumption
(with 900 m³/h air volume)
approx. 1.6 kWh per day /
approx. 35 kWh per month*
Control panel
Manual control panel (6-step switch)
Weight
85 kg (incl. filter)
* for a 5-day week with 10 h operating time per day and 900 m³ air volume

Available colour variants

TAC XT
Available colour versions
Yellow
Also available as stainless steel version
TAC V+
Available colour versions
Yellow, basalt grey, white, bronze
Also available as stainless steel version
TAC M
Available colour versions
Yellow, basalt grey, white, bronze
Also available as stainless steel version
TAC ECO
Available colour versions
Basalt grey
Also available as stainless steel version
TAC BASIC
Available colour versions
Basalt grey
Also available as stainless steel version

Optional accessories and equipment options for the TAC high-performance air purifiers TAC V+, TAC M, TAC ECO and TAC BASIC

Sound protection hood
Sound protection hood

Sound protection hood

Recommended for use in noise-sensitive areas such as schools, offices or medical practices. With the sound protection hood, the subjectively perceived noise can be reduced by up to 50 % yet again. Mounting kit included in the scope of delivery.

Ultra-HighFlow HEPA H14 Heat Resistant filter

Ultra-HighFlow HEPA H14 filter

Only for TAC XT, TAC V+ and TAC M: Compared to the standard HighFlow HEPA H14 filter, the more powerful Ultra-HighFlow HEPA H14 filter allows for a 66 % higher clean air flow rate combined with a noise emission reduce by up to 8 % and an energy consumption that is lower by 30 %.

Flowstop shutter

Flowstop shutters

The flowstop shutters can be attached to one or two of the four insides of the blowing-out tower. This prevents the respective tower side from discharging air, e.g. if air purification is not desired on the respective side or if the device is positioned in front of a wall.

Available as a special model with swivel castors
Available as a special model with swivel castors
Available as a special model with feet

Device version with swivel castors or feet

In addition to the carriage design with foot, the TAC XT, TAC V+, TAC M and TAC ECO are also available as a special version equipped with four feet or with swivel castors with wheel lock.

Manipulation protection

Manipulation protection

This transparent cover of the control panel prevents unauthorised direct access to the control panel or touch display, which is recommended for use in schools or daycare centres.

FlowExtender Silence+ for variably increasing the discharge height

FlowExtender Silence+

Optionally, one to two FlowExtender Silence+ can be mounted underneath the blowing-out tower, thus increasing the discharge position of the air outlets by 50 cm each. In addition, the FlowExtender Silence+ causes a sound reduction of approx. 3 dB.


High-performance air purifier TAC V+ in stainless steel version
High-performance air purifier TAC V+ in stainless steel version
High-performance air purifier TAC V+ in stainless steel version
High-performance air purifier TAC V+ in stainless steel version
High-performance air purifier TAC V+ in stainless steel version

Stainless steel version for hygiene-sensitive areas

The high-performance air purifier TAC V+ as well as the multi air handler TAC XT are optionally also available in stainless steel design, which is ideally suited for the use in areas with specific hygiene requirements or especially reactive atmospheres.

The stainless steel housing is easy to clean and manufactured of the material 1.4301, which features a very high corrosion resistance and which is particularly resistant to various chemical solutions.

TAC V+ Dual for virus filtration in large halls

For virus-free air purification of even very large hall areas we recommend using the TAC V+ Dual. This special model that blows out clean air on both sides offers you all advantages of the TAC V+ basic model, including the unique thermal filter decontamination and regeneration function.

With its high-pressure fan and the special filter equipment, the effectiveness of which has been proven, the Dual design, which draws in air at the floor side and blows it out on two sides, makes it possible to extensively flush even spacious hall areas with virus-free, filtered clean air.

C profiles integrated on both sides allow you to flexibly mount the TAC V+ Dual on the ceiling or wall, in the process of which you can also remove the control panel of the TAC V+ from the unit and attach it near the floor by cable, for example on mounting columns or the hall wall, also making it possible to easily control the high-performance air purifier from a distance even if the TAC V+ Dual has been mounted at a great height.

With the stainless steel version you can even use the TAC V+ Dual, which is available with a variety of clean air capacities on request, in hygiene-sensitive areas without any restrictions. Just contact our experts, we would be happy to advise you personally.

The high-frequency air cleaner TAC V+ Dual is suitable for ceiling mounting
Control unit removable for ground-level remote control
The high-frequency air cleaner TAC V+ Dual is suitable for wall mounting
 
Air cleaner FAQ for virus filtration

Learn more about the technical possibilities of virus air filtration

You want to know which technical aids offer effective protection against viruses in the room air? Do you have any questions with regard to the different cleaning methods offered on the market, their functional principle and their suitability for virus filtration? Visit our air cleaner-FAQ for virus filtration – Here you'll find answers to all of your questions with regard to air purification, virus filtration, standards as well as filter classes and of course the high-performance air purifier TAC V+ ...

We would be happy to advise you personally and calculate the best leasing offer for you

Work more securely with our TAC business leasing from €49 per month*

More freedom through flexible financing at top conditions is made possible by our TAC business leasing with instalments from €49*. We would be happy to advise you personally and calculate the best leasing offer for you: +49 2452-962-730      * plus VAT with 0 % down payment. For traders only

* We will automatically check whether there are federal or state funding programmes available for your application area.

We would be happy to advise you personally

Plan flexibly with the TAC business rental from €15 per day*

Plannable health protection whenever and for as long as you want it. Rent our TAC high-performance air purifiers by the day, over the weekend or for the long term with instalments from €15. We would be happy to advise you personally: +49 2452-962-730      * plus VAT with 0 % down payment. For traders only

Buy

Room air purifier TAC V+ in White/black + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC V+ in White/black + sound insulation hood

The TAC V + has a thermal self-regeneration function of the HEPA special filter, which automatically inactivates all viruses separated in the filter at regular intervals and thus 100% '''decontaminates''' the filter again.

Sie sparen: 277.22 €

4,194.00 € 3,916.78 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier TAC V+ in bronze/black + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC V+ in bronze/black + sound insulation hood

The TAC V + has a thermal self-regeneration function of the HEPA special filter, which automatically inactivates all viruses separated in the filter at regular intervals and thus 100% '''decontaminates''' the filter again.

Sie sparen: 277.22 €

4,194.00 € 3,916.78 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier TAC V+ in grey/black + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC V+ in grey/black + sound insulation hood

The TAC V + has a thermal self-regeneration function of the HEPA special filter, which automatically inactivates all viruses separated in the filter at regular intervals and thus 100% '''decontaminates''' the filter again.

Sie sparen: 277.22 €

4,194.00 € 3,916.78 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier TAC V+ + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC V+ + sound insulation hood

The TAC V + has a thermal self-regeneration function of the HEPA special filter, which automatically inactivates all viruses separated in the filter at regular intervals and thus 100% '''decontaminates''' the filter again.

Sie sparen: 277.22 €

4,194.00 € 3,916.78 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier TAC V+ stainless steel + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC V+ stainless steel + sound insulation hood

The TAC V+ has a thermal self-regeneration function of the HEPA special filter, which automatically inactivates all viruses separated in the filter at regular intervals and thus "decontaminates" the filter 100%. Now with matching sound insulation hood.

Sie sparen: 316.88 €

4,794.00 € 4,477.12 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier M in basalt grey/black + sound insulation hood im Trotec Webshop zeigen

Room air purifier M in basalt grey/black + sound insulation hood

The TAC M high-performance air purifier ensures virus-, bacteria- and aerosol-free room air. Effective high-performance filtration with the highest HEPA filter class certified according to EN 1822.

Sie sparen: 676.01 €

3,809.64 € 3,133.63 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier M in bronze/black +  sound insulation hood im Trotec Webshop zeigen

Room air purifier M in bronze/black + sound insulation hood

The TAC M high-performance air purifier ensures virus-, bacteria- and aerosol-free room air. Effective high-performance filtration with the highest HEPA filter class certified according to EN 1822.

Sie sparen: 457.38 €

3,809.64 € 3,352.26 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier M in white/black + sound insulation hood im Trotec Webshop zeigen

Room air purifier M in white/black + sound insulation hood

The TAC M high-performance air purifier ensures virus-, bacteria- and aerosol-free room air. Effective high-performance filtration with the highest HEPA filter class certified according to EN 1822.

Sie sparen: 653.30 €

3,809.64 € 3,156.34 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier M + sound insulation hood im Trotec Webshop zeigen

Room air purifier M + sound insulation hood

The TAC M high-performance air purifier ensures virus-, bacteria- and aerosol-free room air. Effective high-performance filtration with the highest HEPA filter class certified according to EN 1822.

Sie sparen: 457.38 €

3,809.64 € 3,352.26 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Room air purifier TAC ECO + sound insulation hood im Trotec Webshop zeigen

Room air purifier TAC ECO + sound insulation hood

The high-performance air purifier TAC ECO ensures virus-, bacteria- and aerosol-free room air. Effective high-performance filtration with the highest HEPA filter class certified according to EN 1822.

Sie sparen: 391.52 €

3,173.64 € 2,782.12 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Techn. data TAC V+

Technical data
General information
  Article number 1.580.000.150
Dust class
  (as per DIN EN 1822 (ISO 45H filter ISO 29463) H14
  (as per DIN EN 779:2002) F7
Air flow rate
  Max. air volume flow [m³/h] 2,200
  Suitable for rooms sized up to [m²/m³] with H14 filter class 80 m² /200 m³
  Recommended amount of air for HighFlow filter with filter class H14 ≤ [m³/h] 1,200
  Recommended amount of air for HighFlow filter with filter class H13 ≤ [m³/h]] 1,800
  Recommended amount of air for Ultra HighFlow filter with filter class H14 ≤ [m³/h] 2,000
  Recommended amount of air for Ultra HighFlow filter with filter class H13 ≤ [m³/h] 2,200
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Power consumption without thermal decontamination at 900 m³ / h air volume [kW] 0.16
  Power consumption with thermal decontamination for 30 minutes [kW] 2.5
  Nominal current consumption [A] 11.3
  Recommended fusing [A] 13
Electric connection
  Connection plug CEE 7/7, H07RN-F
  Cable length [m] 4
Sound values
  with sound protection hood - Distance 1 m 33 - 64 dB(A)
  with sound protection hood and Ultra HighFlow filter - Distance 1 m 33 - 62 dB(A)
Fan
  Radial
  axial
  stages 7
Dimensions
  Length (packaging excluded) [mm] 690
  Width (packaging excluded) [mm] 610
  Height (packaging excluded) [mm] 1,300
Weight
  (packaging excluded) [kg] 89
Equipment, features and functions
Equipment
  Thermal filter decontamination
  Thermal filter regeneration
  Touchscreen
  Usage-related, sensor-controlled filter change indication of the F7 prefilter
  Usage-related, sensor-controlled filter change indication of the H14 main filter
  FlowMatic control
  Timer switch for the device is flexibly adjustable
  Timer switch for thermal decontamination is flexibly adjustable
  Operating hours counter
  Update der Steuerungssoftware per USB-Stick
  Sprachauswahl
  Key lock
  Silence Mode
  sound protection hood
  Flowstop shutters
  Hose adapter
  Manipulation protection
Filter change indication
  Pre-filter
  Main filter
Filter
  combination Hygienic areas (≥ 15 ACH) F7 + H14
  Suitable for rooms sized up to Hygienic areas (≥ 15 ACH) [m³] 107
Mobility
  Carry/transport handle(s)
  Trestle rollers/ fixed castors
  Non-marking rubber wheels/rollers
  Foot
  Schutzbügel am Bedientableau
  Full-rubber guide wheels
  Guiding wheels pneumatic tyres
  Stacking frame
  Forklift pockets
  Shock protection frame

 standard equipment

 optionally available

 not available

Techn. data TAC M

Technical data
General information
  Article number 1.580.000.145
Dust class
  (as per DIN EN 1822 (ISO 45H filter ISO 29463) H14
  (as per DIN EN 779:2002) F7
Air flow rate
  Max. air volume flow [m³/h] 2,200
  Suitable for rooms sized up to [m²/m³] with H14 filter class 80 m² /200 m³
  Recommended amount of air for HighFlow filter with filter class H14 ≤ [m³/h] 1,200
  Recommended amount of air for HighFlow filter with filter class H13 ≤ [m³/h]] 1,800
  Recommended amount of air for Ultra HighFlow filter with filter class H14 ≤ [m³/h] 2,000
  Recommended amount of air for Ultra HighFlow filter with filter class H13 ≤ [m³/h] 2,200
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Power consumption without thermal decontamination at 900 m³ / h air volume [kW] 0.16
  Nominal current consumption [A] 3.5
  Recommended fusing [A] 6
Electric connection
  Connection plug CEE 7/7, H07RN-F
  Cable length [m] 4
Sound values
  with sound protection hood - Distance 1 m 33 - 64 dB(A)
  with sound protection hood and Ultra HighFlow filter - Distance 1 m 33 - 62 dB(A)
Fan
  Radial
  axial
  stages 7
Dimensions
  Length (packaging excluded) [mm] 690
  Width (packaging excluded) [mm] 610
  Height (packaging excluded) [mm] 1,300
Weight
  (packaging excluded) [kg] 84
Equipment, features and functions
Equipment
  Touchscreen
  Usage-related, sensor-controlled filter change indication of the F7 prefilter
  Usage-related, sensor-controlled filter change indication of the H14 main filter
  FlowMatic control
  Timer switch for the device is flexibly adjustable
  Key lock
  Update der Steuerungssoftware per USB-Stick
  Operating hours counter
  Sprachauswahl
  Silence Mode
  sound protection hood
  Flowstop shutters
  Hose adapter
  Manipulation protection
Filter change indication
  Pre-filter
  Main filter
Filter
  combination Hygienic areas (≥ 15 ACH) F7 + H14
  Suitable for rooms sized up to Hygienic areas (≥ 15 ACH) [m³] 107
Mobility
  Carry/transport handle(s)
  Trestle rollers/ fixed castors
  Non-marking rubber wheels/rollers
  Foot
  Schutzbügel am Bedientableau
  Full-rubber guide wheels
  Guiding wheels pneumatic tyres
  Stacking frame
  Forklift pockets
  Shock protection frame

 standard equipment

 optionally available

 not available

Techn. data TAC ECO

Technical data
General information
  Article number 1.580.000.140
Dust class
  (as per DIN EN 1822 (ISO 45H filter ISO 29463) H14
  (as per DIN EN 779:2002) G4 Z-line
Air flow rate
  Suitable for rooms sized up to [m²/m³] 80 m² /200 m³
  Max. air volume flow [m³/h] 1,800
  Recommended amount of air for standard filter with filter class H14 ≤ [m³/h] 1,000
  Recommended amount of air for standard filter with filter class H13 ≤ [m³/h] 1,600
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Power consumption without thermal decontamination at 900 m³ / h air volume [kW] 0.16
  Nominal current consumption [A] 3.5
  Recommended fusing [A] 6
Electric connection
  Connection plug CEE 7/7, H07RN-F
  Cable length [m] 4
Sound values
  with sound protection hood - Distance 1 m 33 - 63 dB(A)
  with sound protection hood and ECO-HighFlow-filter - Distance 1 m 33 - 61 dB(A)
Fan
  Radial
  axial
  stages 6
Dimensions
  Length (packaging excluded) [mm] 690
  Width (packaging excluded) [mm] 610
  Height (packaging excluded) [mm] 1,300
Weight
  (packaging excluded) [kg] 84
Equipment, features and functions
Equipment
  Manual control panel
  Usage-related, sensor-controlled filter change indication of the G4 prefilter
  Usage-related, sensor-controlled filter change indication of the H14 main filter
  Timer switch for the device is flexibly adjustable
  Silence Mode
  sound protection hood
  Flowstop shutters
  Hose adapter
  Manipulation protection
Filter change indication
  Pre-filter
  Main filter
Filter
  combination Hygienic areas (≥ 15 ACH) G4 + H14
  Suitable for rooms sized up to Hygienic areas (≥ 15 ACH) [m³] 107
Mobility
  Carry/transport handle(s)
  Trestle rollers/ fixed castors
  Non-marking rubber wheels/rollers
  Foot
  Full-rubber guide wheels
  Guiding wheels pneumatic tyres
  Stacking frame
  Forklift pockets
  Shock protection frame

 standard equipment

 optionally available

 not available

Techn. data TAC BASIC

Technical data
General information
  Article number 1.580.000.139
Dust class
  (as per DIN EN 1822 (ISO 45H filter ISO 29463) H14
  (as per DIN EN 779:2002) G4 Z-line
Air flow rate
  Suitable for rooms sized up to [m²/m³] 80 m² /200 m³
  Max. air volume flow [m³/h] 1,600
  Recommended amount of air for standard filter with filter class H14 ≤ [m³/h] 1,000
  Recommended amount of air for standard filter with filter class H13 ≤ [m³/h] 1,600
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Power input [kW] 0.75
  Power consumption without thermal decontamination at 900 m³ / h air volume [kW] 0.16
  Recommended fusing [A] 6
Electric connection
  Connection plug CEE 7/7, H07RN-F
  Cable length [m] 4
Sound values
  with sound protection hood - Distance 1 m 40 - 64 dB(A)
  with sound protection hood and ECO-HighFlow-filter - Distance 1 m 33 - 61 dB(A)
Fan
  Radial
  axial
  stages 6
Dimensions
  Length (packaging excluded) [mm] 510
  Width (packaging excluded) [mm] 610
  Height (packaging excluded) [mm] 1,300
Weight
  (packaging excluded) [kg] 85
Equipment, features and functions
Equipment
  Manual control panel
  Silence Mode
Filter
  combination Hygienic areas (≥ 15 ACH) G4 + H14
  Suitable for rooms sized up to Hygienic areas (≥ 15 ACH) [m³] 107
Mobility
  Swivel casters with parking brakes
  Feet

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Brochures

Loading...

Downloads

Loading...

Video