Craftsmen or restoration companies are too familiar with this problem: If you have to operate several 16 A three-phase current devices on site, the connection options available on the construction site can be fairly limited. This is because common surface-mounted socket combinations usually house only one additional 16 A CEE socket outlet in addition to a 32 A CEE socket outlet. This combination can also often be found in mobile construction site power distributors.

Electric heating devices, dehumidifiers, high-performance radial fans or mobile air conditioners – if a lot of power is required, these devices usually cannot be operated without three-phase current. And even if the employees take an appropriate power distributor to the construction site, it may sometimes happen that suitable connecting cables are missing in sufficient quantities.

Mobile 16 A power distributor including connecting cable – with a PV30 on board, you are always ready for action

The robust plastics mobile distributor PV30 is a completely ready-to-connect solution equipped with a 32 A plug and two 16 A connector couplings. The input line and both output lines are each equipped with a two-metre connection cable, so that even missing cables are no obstacle on site. At the same time, a sufficient operating range when installing the device is always maintained.

With the mobile distributor PV30, you benefit from brand quality designed by Trotec. Besides, this completely ready-to-connect version including the three integrated connecting cables with a length of two metres each, this mobile power distributor is exclusively available only at Trotec!

Just like all our PV power distributors, the PV30 is characterised by distinct differences in quality compared to other competition models: The solid and premium quality housing of the PV30, for example, is manufactured of a special plastics material, which is characterized by its high resistance, notch impact strength, thermal stability, dielectric strength, UV resistance, chemical and weather resistance – the material used is furthermore free from cadmium, red phosphorus and halogens such as fluorine, chlorine, bromine, iodine or astatine.

The robust plastics mobile distributor PV30 with IP44 type of protection is equally suitable for adverse operational environments in indoor and outdoor areas. Thanks to its two 16 A CEE couplings and the factory-integrated connecting cables with a length of two metres each, it can be optimally used as a power current distributor for two 16 A three-phase current devices, for example on construction sites, in the agricultural sector, at events or for the industry and commercial sector.

PV30 – the optimal connector accessory for the Multi air handler TAC XT 18

As the Multi air handler TAC XT 18 is equipped with two 16 A device plugs as a standard feature, the device can be easily connected to a 32 A socket on site and put into operation by means of an interposed PV30.