Convector TCH 20 E
Reliable direct heating device generating clean warmth for temporary or additional heating
Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
If you want to generate clean warmth in your rooms in a quick and uncomplicated manner, the convector TCH 20 E is an optimal heating solution. Whether the main heating system failed, you need a reliable temporary heating before the start of the heating period, or you wish to heat rooms which are not connected to the central heating system.
All you need for operating this convector is a socket. Just set it up, plug it in, and you're done. Via a heating level switch, the desired heat output can be set and maintained by means of a thermostat. With the TCH 20 E you no longer depend on the oil or gas price, and you can always check how much electricity is consumed at what heating setting.
Even convection heat
The air inside the convectors of the TCH series is warmed up by electrically heated wires and thus rises as warm air, which creates a natural suction that makes cold room air flow into the device. This leads to a permanent circulation of warm air reaching all corners of the entire room. The heat distributes evenly and an excessive or insufficient heating of individual areas is prevented. Once the preset degree of heat is reached, this energy-efficient device switches off automatically and only switches back on when falling below.
The TCH 20 E impresses with many practice-oriented details:
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
- Infinitely variable thermal control
- Three heating levels
- Thermostat-controlled automatic operation
- Frost monitor function
- Energy-efficient operation thanks to automatic switch-off upon reaching the set value
- Overheating protection
- Noiseless heating
- Secure footing due to large feet
Frost monitor function
Ideal for short-term property vacancies or temporarily used rooms
Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
|Level 1 [kW]||0.75|
|Level 2 [kW]||1.25|
|Level 3 [kW]||2|
|Level Max. [kW]||2|
|Mains connection||230 V/50 Hz|
|Max. power input [W]||2,000|
|Nominal current consumption [A]||8.7|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Length (feet included) [mm]||160|
|Width (feet included) [mm]||520|
|Height (feet included) [mm]||390|
|(packaging excluded) [kg]||2|
|Equipment, features and functions|
|Functions and features|
|Frost monitor function|
|Operating control lamp|
|Thermostat-controlled automatic operation|
|Automatic switch-off upon reaching the set value|
|Auto restart function|
|24 h timer|
|Sheet steel – coated|