Thermal wave heater TCH 2050 E
3D all-round warmth with powerful Mica heating elements and remote control
Quick feel-good warmth from all sides
Whether you utilize it as an effective additional heating or for rarely used, unheated rooms – with the thermal wave heater TCH 2050 E you enjoy cosy instant heat in autumn, in winter and also on cool days in spring. With a heating capacity of 2,000 watts, the TCH 2050 E provides comfortable feel-good temperatures in rooms up to 24 m² or 60 m³ – perfect, for example, in the living room, the bedroom, the children's room, the holiday home, the hobby room, the party room, in the office, in sales rooms, or in your conservatory.
Perfect combination of convection heat and infrared radiation
In contrast to many other heating devices or radiant heaters, the heat in the case of the thermal wave heater TCH 2050 E is not only emitted into the room from one direction. The combination of convection heating and Mica infrared heating elements instead provides warmth that can be felt from all sides. Furthermore, the heating elements warm up especially quickly, so making it possible for you to already enjoy the warmth within a few seconds. To maximize the benefits of the TCH 2050 E, place it in the centre of the room, so that you can feel the steady and quick 3D heat distribution. Further on in the text you'll learn more about the functional principle of the thermal wave heater.
Thermostat-controlled for high-level comfort and a low energy consumption
By means of the remote control and the intuitive membrane key control panel, you can quickly and easily select 2 heating levels (1,200 watts and 2,000 watts). The current room temperature is always shown to you on the LCD display. The TCH 2050 E is equipped with an intelligent thermal control via thermostat so that you can adapt its heating capacity optimally to your room temperature.
Just enter your desired target room temperature in the range from 15 °C to 35 °C. The thermal wave heater now heats the room until the preselected temperature has been reached and then switches off automatically. When reheating is required, the heater switches on automatically again, maintaining the room temperature at a constant level. This procedure is especially efficient and energy-saving, as the heating device only heats as much as is necessary to provide for comfortable feel-good warmth.
Noiseless and dust-free warmth
Since the Trotec thermal wave heater in comparison with electric fan heaters does not need a blower, it does not raise any dust in the room. This is especially pleasant, not only for allergy sufferers allergy sufferers and asthmatics. Moreover, the TCH 2050 E generates its warmth in a completely noiseless fashion, making it particular recommendable, for instance, for the use in your bedroom. In this way, you can even have a relaxing and restful sleep in very cold rooms, e.g. if you spend your first night in a holiday home that has not been used for some time.
Timer function – programmable switch-on and switch-off
The practical 24-hour timer of the comfort heating is equally convenient and energy-saving. On request, the device can be switched on or off in a fully automated fashion after an adjustable time (1-24 hours). This for example makes it possible for you to program the heater in your bedroom so that it automatically switches off after you have gone to sleep. Or you preheat the kitchen, so that you can enjoy your morning coffee in the warmth.
Safety first
To ensure reliable heating operation, the thermal wave heater is equipped with an overheating protection, which automatically switches off in the case of a pending heat accumulation. The stable heater is also optimally protected against being knocked over accidentally, e.g. by pets, careless guests or romping children, since the integrated rocker off-switch deactivates the TCH 2050 E immediately if it is brought to a tilted position.
The functional principle of the thermal wave heater TCH 2050 E
With its 3D heating system, the TCH 2050 E cleverly combines the benefits of a convector and those of an infrared heater and in this way provides for real all-round warmth within less than one minute.
Efficient Mica heating technology with mica plates
The three-layer mica heating plates of natural mica ore generate pleasant infrared radiant heat within no time, which, in contrast to conventional radiant heaters, is not only emitted from one direction, but simultaneously to the front and to the back. Another advantage of top-quality mica heating elements is their full-surface and consistent radiation performance. The intensive radiant heat is generated across the whole surface, without performance loss and without oxygen consumption.
Room-filling heat following the natural principle of the sun
The functionality of infrared radiation follows the natural principle of the sun. It does not only heat the air, but the surfaces of the objects which it hits. The objects store the heat and slowly emit it to the room again, so that it continues its effect when the thermal wave heater has already been switched off again. On the skin, infrared radiation creates the pleasant sensation of natural sunlight.
Bonus point: The pleasant warmth has an immediate effect in the whole room without any start-up period and does not have to be transported through the circulating room air first.
Ascending convection heat for an increased heat output
Additionally, the hot mica heating elements emit warm air that also rises upwards. This produces a soft air current that distributes the warmth further in the whole room. This principle is referred to as convection.
Bonus point: The infrared radiation and the convection heat together form a three-dimensional all-round heating system. By the heat that is radiated upwards, to the front and to the back, the whole room is warmed consistently. For quick-spreading feel-good warmth in the whole room – into the farthest corner.
HEALTHY INDOOR CLIMATE
Breathing healthy with the Stop-DryAir function
With the TCH 2050 E you no longer have to worry about heated air that is too dry. In contrast to conventional heating technologies in the case of which heating automatically means a reduction of the room air humidity level, with the thermal wave heating principle the air humidity available constantly remains at the same level in the room to be heated. Feel-good warmth for breathing freely!
Heat plaster for the immune system
In particular in the cold months of autumn and winter, cool temperatures are sensed as unpleasant by the body. Then the infrared heat of the TCH 2050 E covers the skin like a pleasant heat plaster. The circulatory system and the metabolism are stimulated, which, in turn, can have a soothing effect when you suffer from muscular pains and on the locomotor system.
Striking black design
The appearance plays a key role, after all you want to place the cool-black thermal wave heater frequently in the centre of your room. The high quality workmanship and the robust retro charm of the black metal grille places a distinctive design accent in your room ambience.
Rollable, compact and easy-to-transport
Thanks to its compact dimensions, the integrated easy-running wheels and the practical handles, the thermal wave heater TCH 2050 E can be rolled or carried quickly and easily from one room to another. In this way you stay flexible and can optionally place it in the office, in living and business spaces, or for example in a wellness space. The integrated cable winder maintains order both during transport and during storage and prevents trip hazards.
Altogether, the thermal wave heater TCH 2050 E not only convinces by its all-round heating power – owing to its comfort functions and its distinctive design, it is the perfect heating solution for the three cold seasons of the year.
TCH 2050 E – special equipment features
Cosy warmth wherever it is needed ...
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
- 2 heating levels (1,200 W/2,000 W)
- 3D all-round heating system: Combination of infrared radiation and convection heat
- High-quality Mica heating technology with mica plates
- Thermostat-controlled automatic operation with target value preselection between 5° and 35 °C
- Automatic temperature control
- Current room temperature indication
- Stop-DryAir: no drying up of the room air
standard equipment
optionally available
not available
Buy
Wärmewellenheizer Konvektor TCH 2050 E
You save: 80.00 €
149.99 €
69.99 €
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.410.000.540 | |
Heating capacity | ||
Level 1 [kW] | 1.2 | |
Level 2 [kW] | 2 | |
Level Max. [kW] | 2 | |
Electrical values | ||
Mains connection | 230 V, 50/60 Hz | |
Max. power input [W] | 2,000 | |
Nominal current consumption [A] | 8.7 | |
Safety feature | ||
Protection class | I | |
Overheating protection | Available | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.2 | |
Mobility | ||
Carry/transport handle(s) | ||
Stand including castors | ||
Dimensions | ||
Length (feet included) [mm] | 260 | |
Width (feet included) [mm] | 640 | |
Height (feet included) [mm] | 660 | |
Weight | ||
(packaging excluded) [kg] | 5 |
Equipment, features and functions | ||
---|---|---|
Functions and features | ||
Immediate heating due to direct infrared heat | ||
Operation | ||
Multi-stage thermostat | ||
Housing design | ||
Sheet steel – coated |
standard equipment
optionally available
not available