Convector TCH 23 E
Two-stage 2,000-W warmth with turbo blower, power-saving thermostat control and user-friendly handling
Energy-saving warmth in its most beautiful form
The mobile panel radiator TCH 23 E endows rooms and work areas which are only used rarely or which are not connected to the central heating system with energy-efficient warmth and a contemporary design. At the same time, the visually appealing convector convinces by its modern product design, its clear shapes and its ease of use. Switch on, adjust the temperature and enjoy pleasant convection heat in an instant. An intelligent automatic heating function regulates the room temperature fully automatically and thus reduces the electricity consumption to a minimum.
Integrated cost control: intelligent thermostat control
A two-stage heating element with a selectable heating power of 1,000 or 2,000 watts allows for the speedy heating of rooms with a size of up to 24 m² and 60 m³ – for example as an additional heater in living rooms or bedrooms or as a quick-response heater for heating hobby rooms, conservatories, workshops, garages and basements.
The integrated thermostat control by means of which the indoor temperature is regulated fully automatically to the desired target value is equally practical and energy-saving. The desired temperature level is conveniently and steplessly preset via a rotary thermostat which is mounted at the side. Intelligent temperature sensors continuously monitor the room temperature and regulate the heat output of the desired temperature correspondingly. Upon reaching the target temperature, the electric heating element switches off until another heating cycle of the room is required. This saves electricity costs and makes the use of the heating device pleasantly economical – in spite of increasing energy costs.
Pleasant feel-good temperatures at turbo speed
On cold days you want the room to warm up as quickly as possible. This is why the convector TCH 23 E comes equipped with an on-demand turbo blower in both heating levels for accelerated air circulation and distribution of warm air.
Pleasantly warm room temperatures – easily and without any complications
Just like all convectors of the TCH-E series the TCH 23 E also works with the effect of even convection heat. The room air is warmed up in the device by electrically heated wires and thus rises as warm air, creating a natural suction that makes cold room air flow into the device. This leads to a permanent circulation of warm air reaching all corners of the entire room. The heat distributes evenly and an excessive or insufficient heating of individual areas is optimally prevented. As soon as the preset heat level is reached, the device switches off and only switches on again once another heating cycle of the room is required to reach the target value again. This results in a room-filling feel-good warmth which is – thanks to the electric heating element – 100 % clean, condensation-free and odourless.
Wherever clean warmth is required – the convector TCH 23 E provides for a quick heat generation in individual room environments, for example when the main heating has failed, or as an additional heat source.
Clean feel-good warmth for:
- Living spaces
- Studies for working from home
- hobby rooms
- Holiday homes
Available in two designs – with and without turbo fan
There are substantial pros and cons where the use of a convector with turbo fan is concerned. If a room is to be heated within a very short time, the use of the TCH 23 E with an integrated turbo blower is to be recommended, so as to make sure that the warmth spreads in the room as quickly as possible. However, even the quietest of fans will generate a very low operating noise that may be perceived as bothersome in the bedroom. In this case, the TCH 21 E without turbo fan is the best choice.
TCH 23 E – special equipment features
Clean feel-good warmth in living and office spaces
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Heating capacity up to 2,000 W for clean, condensation-free and odourless warmth
- 2 heating levels (1,000 W / 2,000 W)
- Turbo blower for quicker air circulation
- Stepless thermal control
- Thermostat-controlled automatic mode
- Frost monitor function
- Energy-efficient operation thanks to automatic switch-off when reaching the target value
- Maximum safety thanks to overheating and tilt protection
- Noiseless heating (when the fan is not running)
- Secure footing due to large feet
- Integrated recessed handle for easy transport
Frost monitor function
Ideal for short-term property vacancies or temporarily used rooms
Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
|Level 1 [kW]||1|
|Level 2 [kW]||2|
|Level Max. [kW]||2|
|Mains connection||220 - 240 V/50 Hz|
|Max. power input [W]||2,000|
|Nominal current consumption [A]||8|
|Connection plug||CEE 7/7|
|Cable length [m]||1.7|
|Length (feet included) [mm]||172|
|Width (feet included) [mm]||530|
|Height (feet included) [mm]||378|
|(packaging excluded) [kg]||3|
|Equipment, features and functions|
|Functions and features|
|Steplessly adjustable thermostat|
|Frost monitor function|
|Automatic switch-off upon reaching the set value|
|Auto restart function|
|Sheet steel – coated|