Advice for private customers: 00800 80 90 80 90

Advice for business customers: +49 2452 962-400

Mon - Fri: 9:00 - 17:00 (CET)

Trusted Shops
TÜV ISO 9001
  1. Products & Services
  2. Measuring devices
  3. Location and detection
  4. LTC and LTS positioning systems
  5. LTS systems

LTS system

LTS system for locating pinpoints and routes

LTS-System mit Schleifringübertrager
LTS-System mit Schleifringübertrager
LTS-System mit Schleifringübertrager

Stable and flexible fibreglass push cable with a small bending radius

With the universal LTS locating systems, it is possible to locate pinpoints – e.g. for localising defective points in pipe systems or obstructions, drops of pipe pieces etc. – and also routes for determining pipe plans.

Model: Compact carrying frame suited for use on construction sites. Fibreglass cable lined with polypropylene with integrated copper wires, ø 4.5 mm. End point detection coil, connection box with sleeves and pins for connecting two transmitters, protective coated steel pipe frame and ø 400 mm reel.

All LTS models are fitted with a slip ring so that it is even possible to feed the probe cable when the transmitter is connected.

Locating routes

Locating routes

Copper conductors are built into the fibreglass cable of the locating systems, which, when connected to the transmitter, emit a locatable signal along the entire length of the cable. To do so, a transmitter cable is connected at the LTS and the second is grounded.

Locating pinpoints

Locating pinpoints

A probe is attached to the push cable head of the LTS devices, which is easy to locate due to a particularly strong field. The transmitter is connected via two cables at the connection box of the LTS.

The illustrations show an ST-510 transmitter and SR-24 receiver by way of example. Both locating systems allow the use of common transmitters and receivers in the 33 kHz range.

LTS system with slip ring transmitter

LTC system
Ø push cable / Ø probe head: 4,5 mm / 12 mm
LTC system
Push cable length: 30 m, 50 m, 80 m
LTC system
Dimensions: 210 x 440 x 490 mm
LTC system
Maximum detection depth: Approx. 4 m (depending on the composition of the covering material)
Extreme shear stability with small bending radii at the same time
The push cable profile of the LTS systems consists of a special combination of fibreglass cores with integrated copper wires and a protective polypropylene sleeve, which combines the pushing stability of a stiff rod with the flexibility and small bending radius needed from experience. Thus, the cable can also be hand-fed in complex, laid pipe systems quickly, easily and precisely.
LTS system for locating pinpoints and routes
The complete location can be done by just one person. The areas of application of the LTS locating devices include all areas of civil engineering, for example drainage and fresh water management, cable laying or drainage and landfill work.
tracking systems

All tracking systems in direct comparison:

To find the tracking system which exactly meets your requirements, please consult the concise overview of all tracking systems from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Suitable for locating pinpoints and routes
  • Locating can be carried out by just one person working alone
  • Stable and flexible fibreglass push cable with a small bending radius
  • End point detection coil
  • Slip ring for feeding the fibreglass cable even when the transmitter is connected

LTS4530S

LTS4530S Punkt- und Streckenortungssytem 30m show in Trotec online shop

LTS4530S Punkt- und Streckenortungssytem 30m

You save: 189.01 €

699.00 € 509.99 € incl. VAT Show net price (VAT not included)

buy

Stammdaten
Artikelnummer3110005075
Länge ohne Verpackung [mm]210 mm
Breite ohne Verpackung [mm]440 mm
Höhe ohne Verpackung [mm]490 mm
Gewicht ohne Verpackung [kg]3 kg
Gewicht einschließlich Verpackung [kg]6.1 kg
Weitere Abmessungen
Ø Messkopf12 Millimeter
Durchmesser des Schubkabels [mm]4,5
Länge des Schubkabels [m]30
Technische Daten
zu verwendende FrequenzMultifrequenz
Detektion
maximale Erkennungstiefeca. 4 m (abhängig von der Beschaffenheit des überdeckenden Materials)
Funktionen und Ausstattung
Feinjustierbare Bremse
Möglichkeit der Punktlokalisierung
Möglichkeit der Routenverfolgung
mit Schleifring-Sender
Schnittstellen
M4-Verbindungsschraube
externe Sensoren
Passives Aussenden einer Ortungsfrequenz zur Leitungsortung
Energieversorgung
extern (Sendeeinheit)
Gehäuseausführung
Metall
IP-Schutzart
IP SchutzartIP54
Schutz gegen Berührungvollständiger Schutz gegen Berührung
Schutz gegen WasserSchutz gegen allseitiges Spritzwasser
Schutz gegen FremdkörperGeschützt gegen Staub in schädigender Menge

Accessories

Loading...

Alternative products

Loading...

Seminars