Dry air for the wet industry
Air purification, dehumidification and heating: Process optimization in maritime operational and cargo facilities
Climate conditioning for all requirements
With mobile and stationary devices the Trotec Group also ensures process optimization and clean working conditions for the maritime sector: In cargo and maritime operational facilities plenty of dust is raised – enough to rock the boat? The air needs to be cleaned, dehumidified and heated and its quality be checked by means of measuring devices.
Trotec solutions in terms of dehumidification, heating, measurement technology and air cleaning have been established in several sectors for many a year, e.g. the food, chemical or automotive industry. The ensuing knowledge and experiences can also be applied to the requirements for climate conditioning in the maritime sector. For here, too, Trotec as climate expert with mobile and stationary solutions enables process optimization and more efficient working.
Dehumidifying, heating and cleaning – the ideal machines for the maritime sector
For the typical task in a shipyard – namely a high dehumidification performance even at low temperatures – Trotec provides the desiccant dehumidifier TTR 1400. This industrial desiccant dehumidifier dehumidifies up to 177 kg in 24 hours even under rough conditions. With the heat recovery integrated as standard and the electronic energy management all TTR desiccant dehumidifiers rank among the most economic devices of their kind. In contrast to condensation dehumidifiers, the desiccant principle not only enables a reliable and high dehumidification performance even at low temperatures, but above all also the achievement of lower dew points. When the dew points do not have to be quite as low, a condenser dryer for use in ship building, shipyards or the area of cargo is also suitable. For instance the industrial condenser dryer DH 160, which has a dehumidification performance of up to 250 litres per day.
Always the right temperature
The proper temperature also plays an important role when working in the maritime sector. Particularly well suited for the maritime sector is the high-performance electric heating unit TEH 400. It can be controlled electronically in terms of air volume and temperature in multiple stages and is designed for air transport distances of up to 100 metres hose length. Professional devices for air purification not only protect employees, but also other devices and the ship's coating surface from dust deposits and inclusions. Devices such as the air cleaner TAC 6500 come with the required capacity for dust class H. Whether dehumidifying, heating or cleaning: The monitoring of air quality can be ensured with different measuring devices and data loggers of our measuring technology range.
Make use of our best practice industrial services
Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.
You can count on our experts
In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.
Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.
During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.
Trotec is the only provider of this advantage:
Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.
Just give us a call at +49 2452 963-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!
Upon request, we will readily produce tailor-made desiccant dehumidifiers as special models “made in Germany” perfectly geared to your needs, e.g.:
- TTR industrial desiccant dehumidifiers with hygienic design
- TTR industrial desiccant dehumidifiers for PWIS-free dry air
- TTR industrial desiccant dehumidifiers with extremely low dew point
Makes use of the possibility of having special models with tailored components for your individual needs planned, designed and manufactured in close consultation with our specialists.
Click here to find out more ...
Trotec products for the shipbuilding & shipyard sector