The quick-release chuck of the PHDS 10-230V equipped with spindle lock facilitates a fast exchange of your screw or drill bits and via the directional switch you can quickly switch over from clockwise to counter-clockwise rotation or vice versa. All customary drill or screwdriver bit with a shank diameter of up to 13 mm can be clamped in.

The impact drill force of the PHDS 10-230V can be regulated intuitively up to a level of 650 W by increasing the pressure applied to the start button: light pressure => low performance, pushed in all the way => full power – simple as that! Furthermore, the device is provided with a speed limitation for material-compatible working integrated in the start button in form of a setting wheel.

The speed limitation permits the precise and even somewhat cautious operation e.g. for spudding smooth surfaces or driving in screws, for with this electronic control system you can adjust the maximum speed precisely to the material type, thickness and the intended purpose – this also applies to continuous operation which can easily be activated by means of the locking switch.

Optimized handling: The PHDS 10-230V can be held first, as customary, by the ergonomic pistol-shaped handle with soft grip rubber inlays. For safe bimanual operation an additionally mountable handle is also included in the scope of delivery. It can be pivoted by 360° and then fixed in place as required. This easy-to-handle solution is suited perfectly for both right- and left-handers.