PAC roller shutter window shade
Makes it easier to fasten the exhaust air hose to the window and increases the cooling efficiency of mobile air conditioning systems
Makes itself at home at the window and keeps the heat outside
Portable air conditioners of the PAC series, in comparison to stationary air conditioning systems, are a practical and cost-effective solution to cool down heated rooms quickly and effectively to pleasant room temperatures when outdoor temperatures are high. The cooling comfort and cooling capacity of the mobile air conditioner can be additionally increased by the practical PAC roller shutter window shade.
Increases the cooling efficiency of mobile air conditioners
Every user of mobile air conditioning systems knows the problem: where to put the exhaust air hose? Either you hang the hose out of the open window. However, then a great amount of warm air from the outside will flow back again into the room, significantly deteriorating the cooling efficiency and energy balance of the air conditioning system. Or you try to squeeze the hose through the gap of the tilted window, which looks extremely unattractive. This isn’t the ideal solution either!
With the practical PAC roller shutter window shade, the removal of hot air through the open window is perfectly easy – without any technical effort and without having to call a craftsman. Just open the window, stick the shade between the roller shutter and the frame and fasten the exhaust air hose to the window shade using the adapter. That’s it! The room stays pleasantly cool and the heat outside. The length of the blind can be adjusted in no time at all by means of a sliding mechanism, depending on the width of your window.
Easy to install, secure hold, strong performance
The PAC window shade consists of four parts altogether. If the window is too large for the shade, you can easily insert up to two further parts into the shade (1x left / 1x right) to adapt its width. The supplied hose adapter is slipped over the open end of the exhaust hose. With an exhaust air hose diameter of 150 mm, the adapter fits without further aids. Just clip the adapter into the opening of the window shade. Two integrated retaining collars ensure a secure hold and prevent the adapter from loosening when the exhaust air hose moves.
The ideal solution for:
- mobile air conditioners with an exhaust air hose
- side-hung windows, sliding windows and further window types
- especially hot days on which maximum cooling is required
More comfort while maintaining a constantly high performance
The PAC roller shutter window shade has been designed so that it will not affect the proper operation of mobile air conditioning systems. The smaller cross-section of the adapter has no impact on the air conditioner’s exhaust air performance. Instead, you benefit from an improved cooling efficiency and increased flexibility where the utilisation of your air conditioning system is concerned.
Practical inside, invisible outside
The window shade blends in perfectly with white windows and in this way makes routing of the warm air though the window almost invisible from the outside.
Reasons to use the PAC roller shutter window shade:
- Especially easy and optically appealing attachment of the exhaust air hose to the window
- The cooling efficiency of the air conditioning system is increased, since less of the warm air from the outside will flow back to the room
- Uncomplicated installation without the need of calling in a craftsman
- Puts a stop to exhaust air hoses that hang out of windows
- The length is variably adjustable: approx. 47 cm when using the single screen with adapter and 71.5 to 136 cm when using 2 or 3 elements of the roller shutter window screen, depending on the width of the window
Suitable for the following exhaust air hose diameters:
Ø 150 mm – without further tools
The PAC roller shutter window shade from Trotec is a practical addition for all mobile air conditioning systems. It increases convenient application and furthermore improves the air conditioner's cooling efficiency.
Flexibly applicable roller shutter window shade for air conditioners
The PAC roller shutter window shade is a practical addition for mobile air conditioning users. The shade considerably simplifies the routing of the air conditioning exhaust hose to the outside. With the window open, simply clamp the shade between the roller shutter and the frame and attach the air conditioner's exhaust hose to the shade using the window adapter. The room stays pleasantly cool and the heat outside.
The roller shutter window shade is suitable for all mobile air conditioners that have an exhaust hose with a diameter of 150 mm and for the following PAC air conditioners from Trotec:
The roller shutter window shade is compatible with the following PAC air conditioners from Trotec without any further auxiliary means:
The whole range of PAC air conditioners from Trotec: