BH30 socket hygrostat
Feel-good climate paired with economic efficiency
Plug in. Select the desired humidity level. That's it!
The hygrostat BH30 permits the regulation of the humidity level to be adjusted in increments of 1 % in a range between 20 % and 90 % by means of connected humidifiers, air coolers or dehumidifiers. The convenient plug adapter automatically switches these devices on or off and so ensures an agreeable feel-good climate and savings – for unnecessary equipment runtimes are avoided.
More feel-good time thanks to intelligent control
The socket hygrostat is simply installed between humidifier or dehumidifier and socket. Then you select the desired mode and the individual humidity value – that's it! Via an electronic moisture measurement the BH30 determines the current humidity level and compares it to the individually adjustable target humidity values.
Exceeding or falling below the set limits causes the hygrostat to automatically switch the connected humidity-regulating devices on or off, e.g. a humidifier in case of excessively dry air and a dehumidifier if the humidity level is too low. As a consequence the connected devices need no further attention and can be disregarded.
The BH30 is also ideally suited for an efficient automatic control of devices without integrated hygrostat – such as Trotec's air coolers or dehumidifiers without built-in hygrostat.
A few practical benefits
- Simple handling and programming
- Constant humidity regulation of humidifiers and dehumidifiers to a set value
- Regulation of the humidity level between 20 % and 90 % RH
- Prevention of unnecessary runtimes due to automatic device switch-on/switch-off
- Operating status can be identified by red or green indicator light
- Neatly arranged display
- Reset option for selected settings
- Buffer battery for storage of selected settings
Shop
Steckdosen-Hygrostat BH30
You save: 33 %
29.99 €
19.99 €
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 6.100.004.205 | |
Control range | ||
Min. regulation range [% RH] | 20 | |
Max. regulation range [% RH] | 90 | |
Control range | 20 % RH up to 90 % RH | |
Accuracy ± | relative humidity [% RH] | 5 | |
Measuring interval [s] | 10 | |
Switching capacity | ||
Resistive load | 16 A / 3.680 VA | |
Inductive load | 9 A / 2.070 VA | |
CEE 7/3 (Schuko socket type F) | ||
Display | ||
LCD | ||
Monochrome | ||
Device control | ||
Push buttons | ||
Housing design | ||
Plastics | ||
Insulation | ||
Protection class I | ||
IP30 | ||
Power supply | ||
Battery type | 1x 3 V, CR2032 | |
Mains connection | ||
Mains connection | 230 V, 50 Hz | |
Connection plug | CEE 7/7 (plug type F + E) | |
Ambient conditions | ||
Operation - min. temperature [°C] | 5 | |
Operation - max. temperature [°C] | 35 | |
Operation – max. relative humidity (non-condensing) [%] | 95 | |
Storage - min. temperature [°C] | -10 | |
Storage - max. temperature [°C] | 50 | |
Storage - max. relative humidity (non-condensing) [%] | 80 | |
Dimensions | ||
Length (packaging excluded) [mm] | 126 | |
Width (packaging excluded) [mm] | 68 | |
Height (packaging excluded) [mm] | 76 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Device | ||
Getting started guide |
Ascertainable measured values and functions | ||
---|---|---|
Internal sensors | ||
Relative humidity [%] | ||
Air temperature [°C] | ||
Air temperature [°F] | ||
Functions and features | ||
Humidity regulation for humidification and dehumidification mode | ||
Display of current room humidity | ||
Manual switching function | ||
Fail-safe |
standard equipment
optionally available
not available