BE38 clamp meter
Measurement of alternating current without circuit interruption
Easily check load current, AC voltage or continuity of circuits, fuses and contacts
Measuring the current in running systems without the need to switch them off – this is no problem for the clamp-on ammeter BE38.
Since the current measurement is effected without contact via the electromagnetic field, the electric circuit does not have to be interrupted for this procedure: this allows you to check the load current, AC voltage or continuity of circuits, fuses and contacts.
The compact design of the clamp meter with drop-shaped clamping jaws facilitates the use in the commercial and industrial sector, e.g. when working in confined control cabinets or poorly accessible locations.
Moreover, the robust, ergonomically shaped housing of the extremely cost-efficient BE38 allows for convenient one-hand operation.
BE38 – Special equipment features
Resistance measurement and diode test
All Clamp meters in direct comparison:
To find the current clamp which exactly meets your requirements, please consult the concise overview of all Clamp meters from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits
- 3 1/2-digit LCD display (max. count 1999)
- Robust housing
- CAT III 300 V
- Measurement of alternating current up to 400 A
- Voltage measurement up to 300 V (AC/DC)
- Resistance measurement and diode test
- Acoustic continuity test
- Measured value hold function
- Suitable for line diameters of up to 25 mm
standard equipment
optionally available
not available
Shop
/de_DE/3510205239/Stromzange-BE38-67245-1507646087.jpg)
Stromzange BE38
You save: 29 %
16.99 €
11.99 €
incl. VAT
Show net price (VAT not included)
Technical data
| Stammdaten | |
|---|---|
| Artikelnummer | 3510205239 |
| Länge ohne Verpackung [mm] | 148 mm |
| Länge mit Verpackung [mm] | 155 mm |
| Breite ohne Verpackung [mm] | 27 mm |
| Breite mit Verpackung [mm] | 32 mm |
| Höhe ohne Verpackung [mm] | 60 mm |
| Höhe mit Verpackung [mm] | 95 mm |
| Gewicht ohne Verpackung [kg] | 0.16 kg |
| Gewicht inklusive Verpackung [kg] | 0.21 kg |
| Weitere Abmessungen | |
| Leiterdurchmesser max. [mm] | 25 |
| Energie | |
| Anschlussbuchsen für 4mm Sicherheitsstecker (Banane) | 2 |
| Bedingungen bei Betrieb, Lagerung und im Arbeitsumfeld | |
| Betrieb - max. Temperatur [°C] | 40 |
| Betrieb - max. rel. Luftfeuchtigkeit [%] | 75 |
| Betrieb - min. Temperatur [°C] | 0 |
| Lieferumfang |
|---|
| Messgerät |
| Bedienungsanleitung |
| Sicherheitsmessleitungen mit Prüfspitzen |
| Funktionen und Ausstattung |
|---|
| akustische Durchgangsanzeige |
| Batteriestatusanzeige |
| Durchgangsprüfung |
| Diodentest |
| Messwerthaltefunktion |
| Überlastschutz |
| interne Sensorik |
|---|
| Wechselspannung [V/AC] |
| Wechselstrom [A/AC] |
| Durchgangstest |
| Gleichspannung [V/DC] |
| Diodentest |
| Widerstand [Ω] |
| Energieversorgung |
|---|
| intern (Batterie) |
| Konformität |
|---|
| EN 61326 |
| Messkreiskategorie |
|---|
| CAT III (300 V) |
| Gehäuseausführung |
|---|
| Kunststoff |
| IP-Schutzart | |
|---|---|
| IP Schutzart | IP20 |
| Schutz gegen Berührung | Schutz gegen den Zugang mit einem Finger o.ä. |
| Schutz gegen Wasser | kein Schutz |
| Schutz gegen Fremdkörper | Schutz gegen feste Fremdkörper mit Durchmesser ≥ 12,5 mm |