Ozone meter OZ‑ONE
Professional ozone meter with enhanced climate measuring functions
OZ‑ONE – the name says it all:
The first ozone meter that makes mobile professional ozone measurement technology affordable.
Whether naturally generated near the ground or created by technology, even low ozone concentrations in the ambient air have a high damage potential. The compliance with uncritical ozone limit values is therefore not only imperative for health protection, but in many countries clearly regulated and required by law.
With the ozone meter OZ‑ONE you have the ideal testing instrument for a quick and precise check or the long-term detection of ozone concentrations in the ambient air.
The OZ‑ONE is characterized by a minor cross-sensitivity to other gases or VOCs and impresses with quick, highly accurate measurement results even at very low ozone concentrations.
Many integrated functions such as the ozone zero adjustment, the reference value measuring option for short-term exposure limit (STEL) and time-weighted average (TWA) or the value display switchable from ppm to µg/m³ and vice versa make the quickly responding OZ‑ONE an indispensable tool for precise ozone exposure measurements.
Moreover, this device is a compact portable environmental measuring device for the determination of air temperature and humidity or the calculation of dew point and wet-bulb temperature. The dual display of this measuring device always shows you two measured values at a time visible at one glance.
For long-term measurements the OZ‑ONE can also be attached to a tripod. In addition, the measuring device houses both a mini USB port and a barrel-type 9 V coaxial power socket. These ports permit a continuous mains operation as alternative to the battery-powered application. Last but not least, to ensure a mobile power supply via the mini USB port the OZ‑ONE may also be connected to a powerbank.
The ozone meter OZ‑ONE is qualified for manifold possible applications:
- workplace measurements in trade and industry
- environmental analyses
- examination of production environments
- limit monitoring after having used ozone generators for odour neutralization or disinfection, e.g. in the hotel trade and for fire and water damage restoration
 |
Facts worth knowing about ozone measurements using the OZ‑ONE
The nature of ozone
Ozone (chemical symbol: O₃) is a natural component of the upper atmospheric layer, where solar irradiation causes the formation of an ozone molecule from three bonded oxygen atoms. Ozone is unstable, which is why it quickly decomposes to dimeric oxygen again.
Within the Earth's atmosphere, it protects all the living things on our planet from an excessive exposure to UV radiation. Ground-level ozone, on the other hand, is an aggressive irritant gas for us humans. It is formed by photochemical smog reactions in the outside air when exposed to intense sunlight.
Starting with an ozone concentration of 40 µg/m³ the smell can be perceived as something between acrid or pungent and similar to chlorine. Such cases come with a risk of health impairments including an irritation of the mucous membranes in throat, pharynx and bronchia as well as headaches, coughs or an irritation of the eyes.
Due to these ozone-related health hazards it is recommended to use ozone meters that already attain precision at low thresholds – even for checking the compliance with defined limit values. The OZ‑ONE can impress with a high sensitivity at very low concentrations and unlike most competition models it can directly display the ozone concentration in µg per m³ of air.
Commercial and industrial usage of ozone
Ozone is a very powerful oxidising agent and the world's second most powerful disinfectant. For this reason, ozone created by technology is chiefly used for the purification of drinking water, the sterilization and treatment of pool water, the water preparation for the food and beverage industry or the conditioning of cooling and process water.
Another possible application of ozone is bleaching, e.g. paper or textiles. Ozone can further be created when using UV light for industrial drying processes.
Specialized service providers make use of mobile ozone generators to eliminate odours after water or fire damage and to neutralize disagreeable smells in a smoker's car or as part of the car valeting of pre-owned vehicles.
Wherever ozone is produced, you can use the ozone meter OZ‑ONE as reliable monitoring tool to make sure that the maximum allowable concentration is observed.
Compliance with ozone limit values
Seeing as ozone is not only an important gas for industrial applications, but at the same time also an oxidative irritant gas with harmful effects on eyes, nose, pharynx and lungs even at low concentrations, it is especially important to determine and observe defined limit values.
By international standards the MAC thresholds for handling ozone vary between 0.05 and 0.1 ppm (STEL ¹). In outdoor areas the typical exposure limit (TWA ²) for ground-level ozone amounts to 120 µg/m³.
Using the ozone meter OZ‑ONE both parameters can quickly be determined. If required, the measurement value display can simply be adjusted at the push of a button from ppm to micrograms per cubic metre or vice versa.
The electrochemical sensor ³ of the OZ‑ONE is characterized by a high accuracy especially at low ozone levels, as a result even minor concentrations beneath the risk threshold can be detected reliably.
¹ Short-Term Exposure Limit; ² Time-Weighted Average; ³ Electrochemical sensors are wear products and subject to a continuous aging process from the date of manufacture. For this reason, Trotec uses particularly durable sensors with a typical lifetime of two years and with a one-year warranty from the date of purchase throughout Europe.
All Gas measuring devices in direct comparison:
To find the gas meter which exactly meets your requirements, please consult the concise overview of all Gas measuring devices from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Quick and precise determination even of low ozone concentrations
- Indication of the measured ozone value in ppm or µg/m³
- Fast response time
- Minor cross-sensitivity to VOCs
- Ozone zero adjustment function
- Ozone reference value measurement (STEL/TWA)
- Atmospheric pressure offset for high-precision standard cubic metre measurements
- Measuring air temperature and humidity
- Calculating dew point and wet-bulb temperature
- Offset adjustment for air temperature and humidity
- Data hold, MAX/MIN and alarm function
- Display illumination
- ¼ inch threading for tripod connection
- In addition to battery operation also permits mains operation for non-stop measurements
- Energy-saving automatic switch-off
- Incl. calibration certificate
standard equipment
optionally available
not available
Buy
/de_DE/3510006110/OZ-ONE-Ozonmessger%C3%A4t-inkl.-Kalibrier-Zertifikat-120048-1589192222.jpg)
OZ-ONE Ozonmessgerät inkl. Kalibrier-Zertifikat
499.00 € incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.006.110 | |
| Ozone (O3) [ppm] | ||
| Max. measured value | ozone (O3) [ppm] | 1 | |
| Min. measured value | ozone (O3) [ppm] | 0 | |
| Accuracy [ppm] | ozone (O3) [ppm] | <� 0.1 ppm: ± 0.02 ppm or ± 10 % of the current measured value | |
| Ozone (O3) [µg/m³] | ||
| Min. measured value | ozone (O3) [µg/m³] | 0 | |
| Max. measured value [µg/m³] | ozone (O3) [µg/m³] (text) | 1.996 (at 20 °C and 1.013 hPa) | |
| Accuracy [µg/m³] | ozone (O3) [µg/m³] | <� 200 µg/m³: ± 40 µg/m³ or ± 10 % of the current measured value | |
| Air temperature [°C] | ||
| Min. measuring range | Air temperature [°C] | 0 | |
| Max. measuring range | Air temperature [°C] | 50 | |
| Resolution [°C] | 0.1 | |
| Accuracy ± | Air temperature [°C] | 0.6 | |
| Air temperature [°F] | ||
| Min. measuring range | Air temperature [°F] | 32 | |
| Max. measuring range | Air temperature [°F] | 122 | |
| Resolution [°F] | 0.1 | |
| Accuracy ± | Air temperature [°F] | 1.2 | |
| Relative humidity (%) | ||
| Min. measuring range | Relative humidity [%] | 0 | |
| Max. measuring range | Relative humidity [% RH] | 99.9 | |
| Resolution | Relative humidity [%] | 0.1 | |
| Accuracy 0 % - 10 % [%] | 5 | |
| Accuracy 10 % - 70 % [%] | 3 | |
| Accuracy 70 % - 99.9 % [%] | 5 | |
| Display | ||
| LCD | ||
| Monochrome | ||
| Device control | ||
| Push buttons | ||
| Housing design | ||
| Plastics | ||
| Power supply | ||
| Internal (battery) – 4 x AAA 1.5 V | ||
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Operating manual | ||
| Calibration certificate | ||
| Transport bag | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Internal sensors | ||
| Ozone (O3) [ppm] | ||
| Air temperature [°C] | ||
| Air temperature [°F] | ||
| Relative humidity [%] | ||
| Functions and features | ||
| Maximum value display | ||
| Minimum value display | ||
| Time-weighted average (8h) | ||
| Short-term exposure limit (15 min) | ||
| Dew point indication | ||
| Wet-bulb temperature indication | ||
| Measured value hold function | ||
| Display illumination | ||
| Alarm function | ||
| Automatic switch-off | ||
| °C/°F switching | ||
| Tripod | ||
standard equipment
optionally available
not available