Advice for private customers: +49 2452 962-450

Advice for business customers: +49 2452 962-400

Mon - Fri: 9:00 - 17:00 (CET)

Cordless work light PWLS 10-20V of Trotec brand quality
  1. Products & Services
  2. Powertools
  3. Work lights
  4. PWLS 10‑20V

Cordless work light PWLS 10-20V

For a flexible illumination covering larger areas or with pin-point precision. With 300 lumina. Without cable.

2-in-1 solution: Light-intense LED tube light with integrated inspection lamp as torch

Whether for use in a workshop or garage, underneath vehicles, in a basement or attic, in new buildings or summerhouses – there are numerous possible application sites with need for action but little light. At these locations the portable cordless work light brings bright light into the darkness – for good lighting conditions even in poorly accessible workplaces.

The versatile PWLS 10-20V is the perfect work light for all activities in the craft sector and should be a part of every household, for it can be used at any given location –there is no need for a nearby socket.

The freedom of cordless use of the PWLS 10-20V is made possible by its 20 V Flexpower multi-device battery with a charging capacity of 2 Ah. This high-quality premium branded NMC battery can not only be flexibly combined with other cordless Trotec tools, it also always provides its full power until the end even as the charge decreases.

With a luminous flux of 300 lm and a burn time of about 8 hours the cordless work light PWLS 10-20V allows you to benefit from constant bright light even during longer operation.

And in case you are not fully satisfied with this performance alone, the optionally available 4 Ah Flexpower multi-device battery allows you to illuminate your surroundings for twice as long as with the supplied 2 Ah Flexpower battery.

Can also be combined with a 4 Ah multi-device battery and is moreover available as PWLS 10 without battery

Flexpower: allowing flexible combinations

The PWLS 10-20V is supplied with a 20 V Flexpower multi-device battery. This long-lasting lithium-ion battery is part of the Trotec Flexpower system and can also be used with other 20 V power tools from the Trotec product range.

For extra-long working periods the PWLS 10-20V can be used in combination with the optionally available 4 Ah Flexpower multi-device battery that doubles the lighting duration.

Naturally, this work light is also available without battery in the version PWLS 10 – for all users that have already purchased a 20 V Flexpower multi-device battery.

As versatile as your requirements

Two stable and ingeniously angled joints are the reason that the PWLS 10-20V can be adjusted quickly and easily into almost any lighting position. Whilst the tilting joint with 7 lock-in positions allows for a radius adjustment of 180°, the work light can simultaneously be rotated by 270° by means of the swivel joint. With the combined adjustment of both joints the luminous field can be angled as needed to any target position.

For a fatigue-free application of the hand-held PWLS 10-20V its particularly ergonomic handle is not only fitted with soft grip inlays ensuring a firm and secure grip without slipping ... No, the device allows for further optional usage positions: free-standing, lying or even suspended. A suspension hook integrated in the head permits the quick and simple suspension.

Another piece of the standard scope of delivery is the mountable belt clip that facilitates quick access when taking the work light along with you.

Here a lucid explanation of the advantages provided by the PWLS 10-20V

With the cordless work light PWLS 10-20V you basically buy two lamps in one. With 300 lm, the integrated panel light coming in the shape of a highly luminous LED tube light guarantees brightly illuminated work areas. Owing to an additional LED located in the lamp's head the device can be used as full-fledged torch with a luminous intensity of 110 lux. This operating mode is ideally suited for the pinpoint illumination of confined areas. The switch-over from panel light to torch can be accomplished by nothing more than the push of a button.

Flexpower – the innovative multi-device battery system from Trotec

Even the standard scope of delivery of this power tool from Trotec already includes a powerful 20 V multi-device battery from the Trotec Flexpower portfolio with a high charging capacity of 2 Ah. You can check the current charging status via the three-stage battery level indication that is integrated in the battery housing and clearly visible at one glance.

This power pack that can be fully charged in about an hour not only enables device runtimes extended by up to 33 % – as compared to standard batteries with only 1.5 Ah – moreover, this Flexpower multi-device battery can also be flexibly combined with different Trotec tools, including i.a. the cordless rotary hammer PRDS 10‑20V, the cordless multi-function tool PMTS 10‑20V, the cordless portable circular saw PCSS 10‑20V, the cordless random orbital sander PESS 10-20V, the cordless work light PWLS 10‑20V, the cordless work LED light PWLS 15‑20V, the cordless drill driver PSCS 11‑20V, the cordless hammer drill PHDS 11‑20V, the cordless grass and shrub shears PGSS 10-20V, the Cordless compressor PCPS 11‑20V and air pump PCPS 12‑20V, the cordless pendulum action jigsaw PJSS 11‑20V, the cordless hand-held vacuum cleaner VC 10‑20V or the Cordless vacuum cleaner VC 15‑20V.

Thanks to Flexpower you can do without unnecessary batteries and chargers – and the search for a suitable battery has also come to an end. Simply change the device, not the battery. Flexpower puts a stop to the unnecessary amount of various exchangeable batteries; the combination option with an ever increasing number of tools allows you flexibility at all times so you can carry on your projects energetically!

Premium branded battery for constantly full power

Premium branded battery

By now, lithium-ion batteries are widely distributed, after all they come without memory effect and self-discharge. Plus these batteries can be disconnected from the charger and used right away without it affecting the battery’s lifetime. But “lithium ions” is a generic term used for batteries of various qualities and made of diverse electrode materials; including those with a perceptibly weakening performance once the battery charge decreases.

Lithium-ion batteries supplied by Trotec are high-quality premium branded NMC batteries with a high energy density and charging voltage lasting until the end without exceptions – guaranteed! Compared to conventional lithium-ion batteries the performance of our premium branded batteries does not decrease even as the discharge increases.

Consequently, you benefit from lasting maximum power even with an almost empty battery. During longer operation only the battery charge decreases, never their performance – that is the added value of Trotec’s premium branded batteries!

The key equipment features of the PWLS 10-20V at a glance

Flexible orientation of the lamp head: can be rotated by 270° and tilted by 180°
The head can be rotated by 270° and tilted into 7 lock-in positions by up to 180° permitting nearly every lighting position.
Front LED as spotlight
Thanks to the additional front LED with 250 lm it can also be used as torch for pinpoint illumination.
Integrated suspension hook
The fold-out hook enables the quick attachment as pendant lamp.
Soft grip inlays for extra firm grip
For extra firm grip the handle is fitted with soft grip rubber inlays.
Quick charger
Quick charger with automatic charge termination – only 1 hour of charging required.
Three-stage battery level indication
Three-stage illuminated battery status indicator.
Wrist strap fixture
Practical feature: Wrist strap fixture to prevent losing or dropping the lamp.
Mountable belt clip
Mountable belt clip facilitates quick access and transport.

The PWLS 10-20V offers manifold application options

Accurate reading without difficulty due to optimal illumination
Using the PWLS 10‑20V you can for instance read the meter in poorly illuminated or unlit surroundings accurately and without difficulty.
An integrated fold-out hook permits the quick suspension of the PWLS 10-20V
The PWLS 10‑20V is provided with a stable base and a suspension hook integrated in the head, consequently, the lamp can be positioned as needed to best suit the situation: free-standing, lying or suspended.
The PWLS 10-20V brings bright light for working at any location
Present control, inspection or repair work to be performed on your vehicle in the proper light using the PWLS 10‑20V. Stably positioned with a low centre of gravity this work light is suitable for all applications taking place in poorly illuminated or unlit surroundings.
Torch function for a spotlight of 110 lux
The fuse trips and all of a sudden you're in the dark. Lucky is the person who has a PWLS 10‑20V with integrated torch function on hand. Thanks to the lithium-ion technology this work light is always ready for use even if it hasn't been used for while.
Technical data by comparison

All work lights in direct comparison:

To find the work light which exactly meets your requirements, please consult the concise overview of all work lights from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Light-intense, branded work light in TÜV-tested quality
  • Flexpower multi-device battery system – can be flexibly combined also with other cordless tools from Trotec
  • Powerful 20 V lithium-ion battery without memory effect and self-discharge
  • Flexible orientation of the lamp head: can be rotated by 270° and tilted by 180°
  • 2-in-1solution: Light-intense LED tube light with integrated inspection lamp as torch
  • Enabling both pinpoint and large-scale illumination
  • High-performance LED with a luminous flux of 300lm
  • Quick charger with automatic charge termination: only 1 hour of charging required
  • Three-stage battery level indication
  • Soft grip rubber inlays in the housing for extra firm hold
  • Integrated suspension hook for simple attachment
  • Mountable belt clip facilitates access and transport

All important features at a glance

Allowing flexible combinations – one battery suitable for many devices
Lithium-ion battery with 2 Ah capacity
Quick charger – only 1 hour of charging required
Spotlight with a luminous flux of 250 lm
Panel light with a luminous flux of 300 lm
Long burn time
Three-stage battery status indicator
2 LED lamps for the illumination of larger areas or with pin-point precision
Torch function facilitated by the additional LED in the lamp head
Light-intense LED tube light for the illumination of larger areas
Lamp head can be rotated by 270°
Lamp head can be tilted into 7 lock-in positions by up to 180°
Cordless power for highly mobile applications
Soft grip for improved handling
Integrated suspension hook
Scope of delivery PWLS 10-20V

We supply the PWLS 10‑20V ready for use incl. quick charger, Flexpower multi-device battery 20 V, 2 Ah and mountable belt clip.


Brand quality plus cost-efficiency

So far, you basically only had two options when choosing a cordless work light: either good but expensive, or mainly cheap.

Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!


Trotec's cordless work lights at a glance

PWLS 01-3

Tube LED work light
PWLS 01-3

Extra bright work spotlight with 3 fastening devices, torch and flashing warning light function.

PWLS 05-10

LED work light
PWLS 05‑10

Cordless 10-watt LED work light with magnetic holder and battery operation.


PWLS 06-10

Cordless work light
PWLS 06-10

Powerful cordless LED work light with magnetic holder and USB Powerbank.


PWLS 08-10

Cordless LED work light
PWLS 08‑10

Powerful rechargeable LED work light with flexible carrying handle, magnetic holder and USB power bank.

PWLS 10‑20V

Cordless work light
PWLS 10‑20V

Powerful cordless LED tube light. The Flexpower multi-device battery can also be combined with other PowerTools from Trotec.

PWLS 15-20V

Cordless LED work light
PWLS 15‑20V

Powerful cordless LED work light. The Flexpower multi-device battery can also be combined with other PowerTools from Trotec.

Buy

Akku-Arbeitsleuchte PWLS 10-20V inkl. Akku und Ladegerät show in Trotec online shop

Akku-Arbeitsleuchte PWLS 10‑20V inkl. Akku und Ladegerät

You save: 66 %

59.99 € 19.99 € incl. VAT Show net price (VAT not included)

buy

Akku-Arbeitsleuchte PWLS 10 (ohne Akku) show in Trotec online shop

Akku-Arbeitsleuchte PWLS 10 (ohne Akku)

You save: 80 %

24.99 € 4.99 € incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 4.455.000.110
Technical data
  Colour temperature (K) 6,200
  Energy efficiency class I
Spotlight LED
  Power input Spotlight LED [W] 3
  Luminous flux Spotlight LED [lm] 250
  Illuminance Spotlight LED [lux] 110
  Burn time Spotlight LED 6 h
Surface LED
  Power input Surface LED [W] 3
  Luminous flux Surface LED [lm] 300
  Illuminance Surface LED [lux] 11
  Burn time Surface LED 8 h
Functions and features
  ON/OFF switch
  Lamp head, swivelling 180° in 7 positions
  Lamp head, rotatable 270°
  Softgrip
  Flexible suspension hook
  Wrist strap attachment
  Belt clip
  Flashing warning light
  Mounting bracket
  Brightness levels 1
  Stroboscope
  Battery level indication Available
  Changeable battery
Electrical values battery
  Battery nominal voltage [V] 20
  Battery capacity [Ah] 2
  Capacity indication 3-stage
  Battery type Li-ion
Charger
  Mains connection 230 - 240 V, 50 Hz
  Output voltage [V] 21.5
  Power input [W] 65
  Nominal current consumption [mA] 2,400
  Connection plug CEE 7/16
  Cable length [m] 1.5
  Protection class II
Dimensions
  Length (packaging excluded) [mm] 85
  Width (packaging excluded) [mm] 70
  Height (packaging excluded) [mm] 175
Weight
  (packaging excluded) [kg] 0.38
Standard scope of delivery
Accessories scope of delivery
  Number of batteries 1
  Quick charger

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...