Cordless tacker PTNS 10-20V
Speedy working with wire nails and staples with the six-level impact force selector – including 500 staples and nails
Cordless universal tacker for creative professional craftsmen and DIY enthusiasts
There is always something to do for the cordless tacker PTNS 10‑20V with its unlimited use. Whether you're working in the house, for your hobby, or if you're using staples of type 55 or hammering in wire nails of type 47 for fastening the many different materials such as wood, sheeting, leather or cardboard on the construction site – you can always rely on the cordless PTNS 10-20V with its long-lasting Flexpower 20-V lithium-ion battery (2.0 Ah). The high stroke rate of 30 shots/minute and a magazine capacity of 100 staples or 50 wire nails with a practical fill level indicator will enable you to quickly progress with your work. Forget about unhandy hammering using a hammer and nails. With its slim tacker guide nose the lightweight PTNS 10‑20V is suitable even for working close to edges in places that are difficult to access, always providing for maximum work safety. The controlled ejection of staples only takes place when the tacker guide nose touches the workpiece. The special feature of the cordless tacker are complemented by providing yet another bit of additional work safety by an anti-slip soft grip , ensuring safe working with one hand.
Position, fasten, done! Applying staples and wire nails in 6 power levels!
Professionals already know: If the impact force is to high, the material is damaged or fully penetrated. If the impact force is to low, staples or nails do not penetrate the material to a sufficient extent.
In order to adapt the insertion depth of the staples and wire nails with their different lengths optimally to the material to be fastened, the impact force can be adjusted in six levels via the impact force rotary selector switch on the device top.
Perfectly equipped to get off to an energetic start right away: Including staples and wire nails
The integrated LED work light ensures the best possible illumination of the working area. The three-stage battery level indication reliably informs you at any time about the remaining charging capacity of the 20 V multi-device battery with a total powerful 2 Ah charging capacity. In order to benefit from a quicker charging process (1 h), a quick charge with automatic charge termination is supplied in the standard scope of delivery. The ready-to-start set is complemented by the 500 x staples of type 55 (length 20 mm, width 6 mm) and the 500 x wire nails of type 47 (length 20 mm, width 0.8 mm). Everything immediately at hand Dust and impact-proof storage in a convenient transport case.
Your set for getting started right away: Secure hold for a multitude of applications
The 20 V 2 Ah battery is partially charged upon delivery, allowing you to immediately start using the device after unpacking. And because the scopes of application of the cordless tacker are just as diverse as the materials to be fixed when implementing DIY projects, the scope of delivery of the PTNS 10‑20V already includes a comprehensive range of premium staples and wire nails as a standard.
Accessories contained in scope of delivery:
500 x Steel nails
type 55, length: 20 mm, width: 6 mm
500 x Steel nails
type 47, length: 20 mm, width: 0.8 mm
1 x Flexpower multi-device battery (20 V 2 Ah)
Thanks to Flexpower you can do without unnecessary batteries and chargers. The battery that comes with a battery level indication takes only up to 1 h to be fully charged in the supplied charging station. The battery offers a high charging capacity of 2 Ah which guarantees for enduring missions with numerous Trotec electric tools.
1 x Transport case
The transport case made of high-quality plastics provides protection from dust and offers a fixed place for every equipment part. Optimally suited for the use on changing construction sites or for a safe storage in tool storage basements or tool cabinets.
Additional staple lengths for even more application flexibility
The fields of application of a tacker are just as diverse as the staples offered, which are accessories available for order at all times at Trotec. For fixing fabrics and textiles, fine wire staples are ideal, for foils we especially recommend using flat wire staples. To fix ornamental borders or thin pieces of timber, it's best to use nails in many different lengths.
When determining the staple length required, the following applies: 1/3 of the staple length for the material to be fastened, 2/3 of the staple length for the substrate material. When working in hard woods, a ratio of 1:1 should be selected to ensure an optimum hold.
Flexpower – the innovative multi-device battery system from Trotec
Even the standard scope of delivery of this power tool from Trotec already includes a powerful 20 V multi-device battery from the Trotec Flexpower portfolio with a high charging capacity of 2 Ah. You can check the current charging status via the three-stage battery level indication that is integrated in the battery housing and clearly visible at one glance.
This power pack that can be fully charged in about an hour not only enables device runtimes extended by up to 33 % – as compared to standard batteries with only 1.5 Ah – moreover, this Flexpower multi-device battery can also be flexibly combined with different Trotec tools, including i.a. the cordless rotary hammer PRDS 10‑20V, the cordless multi-function tool PMTS 10‑20V, the cordless portable circular saw PCSS 10‑20V, the cordless random orbital sander PESS 10-20V, the cordless work light PWLS 10‑20V, the cordless work LED light PWLS 15‑20V, the cordless drill driver PSCS 11‑20V, the cordless hammer drill PHDS 11‑20V, the cordless grass and shrub shears PGSS 10-20V, the Cordless compressor PCPS 11‑20V and air pump PCPS 12‑20V, the cordless pendulum action jigsaw PJSS 11‑20V, the cordless hand-held vacuum cleaner VC 10‑20V or the Cordless vacuum cleaner VC 15‑20V.
Thanks to Flexpower you can do without unnecessary batteries and chargers – and the search for a suitable battery has also come to an end. Simply change the device, not the battery. Flexpower puts a stop to the unnecessary amount of various exchangeable batteries; the combination option with an ever increasing number of tools allows you flexibility at all times so you can carry on your projects energetically!
Premium branded battery for constantly full power
By now, lithium-ion batteries are widely distributed, after all they come without memory effect and self-discharge. Plus these batteries can be disconnected from the charger and used right away without it affecting the battery’s lifetime. But “lithium ions” is a generic term used for batteries of various qualities and made of diverse electrode materials; including those with a perceptibly weakening performance once the battery charge decreases.
Lithium-ion batteries supplied by Trotec are high-quality premium branded NMC batteries with a high energy density and charging voltage lasting until the end without exceptions – guaranteed! Compared to conventional lithium-ion batteries the performance of our premium branded batteries does not decrease even as the discharge increases.
Consequently, you benefit from lasting maximum power even with an almost empty battery. During longer operation only the battery charge decreases, never their performance – that is the added value of Trotec’s premium branded batteries!
The key equipment features of the PTNS 10-20V at a glance
Whether you want to use staples or wire nails – with the cordless tacker PTNS 10-20V you are always perfectly equipped
All electric tackers in direct comparison:
To find the electric tacker which exactly meets your requirements, please consult the concise overview of all electric tackers from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- 20-V lithium ion battery without memory effect and without self-discharge
- Flexpower multi-device battery 20 V 2.0 Ah – can also be flexibly combined with other rechargeable tools
- Suitable for staples of type 55 and wire nails of type 47
- Fast shot sequence of 30 shots per minute
- Use of different staple lengths and types of material ensures a perfect work result
- 6-level rotary switch for preselecting the impact force
- Safety nose – controlled ejection of staples only possible in working position
- Rubberized softgrip inserts in the housing to provide for an extra strong grip
- Fatigue-free working thanks to the light weight
- Bottom-loading mechanism for easy reloading or exchanging of staples and wire nails
- Integrated staple magazine with clearly visible filling level indication – can be filled with 100 staples / 50 wire nails
- Built-in LED work light
- Quick-charger with automatic charge termination: only 1 hour of charging required
- Three-stage battery status indicator integrated in the battery
- Trotec brand quality with double safety certification for cordless tacker and battery charger
All important features at a glance
Unpack the device, insert the battery, get started: The cordless tacker PTNS 10‑20V is delivered with a partly charged 20-V lithium-ion battery and a corresponding quick-charger. The standard scope of delivery already contains 500 x steel staples of type 55 (20 mm), 500 x wire nails of type 47 (20 mm) as well as a practical transport case for dust-protected storage in the tool cellar or tool cabinet.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: These are some of the quality features of Trotec's rotary hammers. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Staples and wire nails as available accessories for the PTNS 10‑20V:
|Firing rate [min-1]||30|
|Holding capacity of the magazine||100 staples of type 55, 50 wire nails of type 47|
|Staple length||15 - 25 mm|
|Staple width [mm]||6|
|Wire nail length||15, 20, 25, 32 mm|
|Wire nail width [mm]||0.8|
|Sound values according to EN 60745|
|Sound pressure level [dB(A)]||84.1|
|Uncertainty (K) [dB(A)]||3|
|Sound power level [dB]||95|
|Vibration information according to EN 60745|
|Vibration emission value (ah) [m/s²]||2.879|
|Electrical values battery|
|Battery nominal voltage [V]||20|
|Battery capacity [Ah]||2|
|Battery charging time [h]||1|
|Mains connection||230 - 240 V/50 Hz|
|Output voltage [V]||21.5|
|power input [W]||65|
|Nominal current consumption [mA]||2,400|
|Cable length [m]||1.5|
|Length (packaging excluded) [mm]||70|
|Width (packaging excluded) [mm]||200|
|Height (packaging excluded) [mm]||225|
|(packaging excluded) [kg]||2.5|
|Equipment, features and functions|
|Functions and features|
|Impact force regulator||6-stage|
|Magazine filling level indicator for staples and wire nails|
|LED work light|
|Button for LED work light|
|Standard scope of delivery|
|Accessories scope of delivery|
|Staples (type 55)||Length 20 mm: 500 pcs.|
|Wire nails (type 47)||Length 20 mm: 500 pcs.|