Angle grinder PAGS 10-125
Compact all-rounder for safe severing, cutting and grinding
Powerful and durable 1,200 W motor for quick and efficient continuous operation
With this high-performance angle grinder at hand you can meet as good as every conceivable challenge. The powerful 1,200 W motor impresses with a constantly high performance. This combined with the low-vibration operation and you have ideal conditions for effortless, comfortable cutting, grinding and brushing of metal or for cutting tiles and concrete blocks.
Owing to the durable die-cast aluminium gearhead the PAGS 10-125 can offer a high stability and with a steady speed of 5,000–12,000 revolutions per minute it also ensures a quick working progress even under load. The infinitely variable speed selection via setting wheel permits you to adjust the device performance to the respective material. What is more, the electronic system continually readjusts the set speed so as to maintain the preselected speed even though the load increases. The light weight allows for better control during longer applications.
Another equipment feature of the angle grinder is spindle lock enabling a quick and easy tool change. All it takes to exchange the abrasive wheel is to push the angle grinder's release button. Unlike many other devices the PAGS 10-125 also permits a quick and tool-free adjustment of the protective cover making your life much easier when trying to reach corners.
One job done, the next is just waiting around the corner
Once the job has been done, you can store your angle grinder perfectly neat and tidy for a suitable transport case is already included in the standards scope of delivery. Also, the case houses both the angle grinder and the mounted disc without having to worry about the tool starting to slip which renders the unnecessary disassembly of the disc a thing of the past. This robust case comprises the PAGS 10-125 including accessories, e.g. cutting disc, protective cover, additional handle, pin-type face wrench and clamping nut. That way, device and accessories are stored in an orderly manner – ready for the next application – and protected from dust and damage during transport.
Ergonomic design for more security
A firm and secure grip is ensured even during longer working periods owing to the ergonomically optimized design of the light and compact PAGS 10-125 with the slim handle perimeter and the soft grip rubber inlays of main and additional handle.
Moreover, the additional handle promotes the practically effortless two-handed operation and can be mounted to three different positions for good measure. This makes the PAGS 10-125 flexibly applicable e.g. for working horizontally or vertically and it also ideally suited for left-handers. The on/off switch with start lock preventing an inadvertent start-up of the angle grinder achieves additional safety.
The flat metal gearhead not only ensures an ideal force transmission and low vibrations during operation, it also facilitates working at poorly accessible locations.
Further possible applications are open to your PAGS 10-125 when combined with our multi-part sets of cutting discs for metal or stone, the set of cutting and roughing discs or the set of diamond cutting discs – all in the best Trotec brand quality.
The key equipment features of the PAGS 10-125 at a glance
The PAGS 10-125 can be used for severing, cutting and grinding
All Angle grinders in direct comparison:
To find the Angle grinder which exactly meets your requirements, please consult the concise overview of all Angle grinders from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Powerful and durable 1,200 W motor for quick and efficient continuous operation
- Ideal for cutting, grinding and brushing metal as well as for cutting tiles and concrete blocks
- Material-compatible working thanks to infinitely variable speed selection via setting wheel
- Constantly high performance with a steady speed of 5,000 rpm to 12,000 rpm even under load
- Durable, slim die-cast aluminium gearhead
- Comfortable working due to low vibrations
- Spindle lock allowing simple exchange of discs
- Quick and tool-free adjustment of the protective cover
- On/off switch with start lock
- Main and additional handle with soft grip rubber inlays
- Additional handle can be variably mounted in 3 positions
- Angle grinder can be stored in the case without having to disassemble the disc
- Wide operating range owing to robust rubber cable of 3 m length
- Angle grinder of TÜV-tested quality
All important features at a glance
Which type of disc is to be used for the angle grinder?
 |
 |
 |
 |
Also, the following accessories are available for angle grinders:
- Roughing discs for processing metal (AD 125 MG)
- Sanding pads for removing old coats of paint or derusting metal
- Serrated washers for grinding or polishing
- Fur polishing discs (reduced speed)
- Wire brushes for derusting and to prepare soldering and welding work
Abrasive wheels and cutting discs are available with diameters of 115, 125 and 230 mm. Depending on the selected grinding, cutting or roughing disc you can use the angle grinder for various tasks at home, in the garden or for the craft sector.
Large-sized discs are primarily intended for coarse work and only used for the bimanually guided angle grinder. For applications that require a greater level of precision, the combination of smaller discs and a one-hand angle grinder is better suited.
All the discs for angle grinders supplied by Trotec can be ordered individually and as practical special offer package.
standard equipment
optionally available
not available
Shop
/de_DE/4440000005/Winkelschleifer-PAGS-10-125-125419-1599661107.jpg)
Winkelschleifer PAGS 10‑125
You save: 41 %
59.99 €
34.99 €
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.440.000.005 | |
| Technical data | ||
| Rated speed | 5.000 - 12.000 min-1 | |
| Spindle thread | M14 | |
| Type of protection | IP20 | |
| Protection class | II | |
| Disc size [mm] | 125 | |
| Electrical values | ||
| Power input [W] | 1,200 | |
| Mains connection | 230 V, 50 Hz | |
| Connection plug | CEE 7/17 | |
| Cable length [m] | 3 | |
| Sound values according to EN 60745 | ||
| Sound pressure level [dB(A)] | 91 | |
| Sound power level [dB(A)] | 102 | |
| Uncertainty K [dB] | 3 | |
| Vibration information according to EN 60745 | ||
| Vibration emission value (ah) Main handle [m/s²] | 13.43 | |
| Uncertainty (K) Main handle [m/s²] | 1.5 | |
| Vibration emission value (ah) Additional handle [m/s²] | 9.77 | |
| Uncertainty (K) Additional handle [m/s²] | 1.5 | |
| Data cutting disc | ||
| Idle speed [min-1] | 12,250 | |
| Max. disc speed [m/s] | 80 | |
| Cutting disc diameter [mm] | 125 | |
| Bore diameter [mm] | 22.23 | |
| Cutting disc thickness [mm] | 3.2 | |
| Functions and features | ||
| On/off switch with safety switch | ||
| Soft start | ||
| Spindle lock | ||
| Additional handle 3 mounting options | ||
| Infinitely variable speed control | ||
| Softgrip | ||
| Accessories scope of delivery | ||
| Cutting disc | ||
| Wrench | ||
| Pin-type face wrench | ||
| Protective cover | ||
| Additional handle | ||
| Transport case | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 100 | |
| Width (packaging excluded) [mm] | 420 | |
| Height (packaging excluded) [mm] | 120 | |
| Weight | ||
| (packaging excluded) [kg] | 2.5 | |
standard equipment
optionally available
not available